9 material differences · fewer than 12

Tractor oneDeutz-Fahr AgroStar 8.311993–1995No measured PTO figureTractor twoFendt Favorit 824 LSE1993–2004No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 8.31 and the Favorit 824 LSE → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 8.31 and Fendt Favorit 824 LSE, field by field
FieldAgroStar 8.31Favorit 824 LSEGap
Engine
Engine power, claimed claimed227.0 hp227 hp—
Engine declaredKHD BF6L 513 FRMAN D 0826 LE 523differs
Displacement declared9.57 L6.87 L+39% AgroStar 8.31
Maximum torque declared647 lb·ft · 877 N·m698 lb·ft · 947 N·m+8% Favorit 824 LSE
Transmission
Top speed declared24.9 mph · 40 km/h31.1 mph · 50 km/h+25% Favorit 824 LSE
Clutch declaredOil-cooled FUNK multi-disc clutchwet multi-plate driving clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared23.0 gpm · 87.0 L/min26.9 gpm · 102.0 L/min+17% Favorit 824 LSE
Rear PTO speeds declared1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared18,761 lb · 8,510 kg17,196–18,188 lb · 7,800–8,250 kgdiffers
Maximum permissible mass declared26,455 lb · 12,000 kg26,455 lb · 12,000 kg—
Wheelbase declared117.0 in · 2,972 mm111.8 in · 2,840 mm—
Length declared200.0 in · 5,080 mm194.5 in · 4,940 mm—
Width declared96.1 in · 2,440 mm102.0 in · 2,590 mm+6% Favorit 824 LSE
Ground clearance declared22.8 in · 580 mm23.8 in · 605 mm—
Turning radius, braked declared—17.7 ft · 5.40 m—
Fuel tank declared387.8 qt · 367 L391.0 qt · 370 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr AgroStar 8.31 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr AgroStar 8.31”

Fendt Favorit 824 LSE sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 824”