6 material differences · fewer than 12
Tractor oneDeutz-Fahr AgroStar 6.611990–1995No measured PTO figureTractor twoFendt Favorit 612 LSA1988–1993No measured PTO figure
Which should you choose?
Read our verdict on the AgroStar 6.61 and the Favorit 612 LSA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | AgroStar 6.61 | Favorit 612 LSA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 141.1 hp | 142.3 hp | — |
| Engine declared | KHD BF6L 913 | MWM TD 226.6.2 | differs |
| Displacement declared | 6.13 L | 6.24 L | — |
| Maximum torque declared | 405 lb·ft · 549 N·m | 408 lb·ft · 553 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.5 gpm · 55.0 L/min | 19.0 gpm · 72.0 L/min | +31% Favorit 612 LSA |
| Rear PTO speeds declared | 1000 rpm | — | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 15,487 lb · 7,025 kg | +30% Favorit 612 LSA |
| Maximum permissible mass declared | 20,944 lb · 9,500 kg | — | — |
| Wheelbase declared | 106.8 in · 2,713 mm | 105.9 in · 2,690 mm | — |
| Length declared | 186.1 in · 4,726 mm | 185.3 in · 4,707 mm | — |
| Width declared | 97.2 in · 2,470 mm | 93.7 in · 2,380 mm | — |
| Ground clearance declared | 21.3 in · 540 mm | 19.7 in · 500 mm | +8% AgroStar 6.61 |
| Turning radius, braked declared | — | 18.7 ft · 5.70 m | — |
| Fuel tank declared | 306.4 qt · 290 L | 232.5 qt · 220 L | +32% AgroStar 6.61 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr AgroStar 6.61 sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 6.61”
- Source: Traktorenlexikon, “Deutz-Fahr DX 160”
Fendt Favorit 612 LSA sources
- Source: Traktorenlexikon, “Fendt Favorit 612 LSA”