Deutz-Fahr AgroStar 6.38 vs Fiat F-120 DT

6 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1990–1993

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 6.38 and the F-120 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 6.38 and Fiat F-120 DT, field by field
Field	AgroStar 6.38	F-120 DT	Gap
Engine
Engine power, claimed claimed	123 hp	116.4 hp	+6% AgroStar 6.38
Engine declared	K.H.D. BF6L 913 T	FIAT-IVECO 8065.05 B 330	differs
Displacement declared	6.13 L	5.86 L	—
Maximum torque declared	340 lb·ft · 461 N·m	288 lb·ft · 390 N·m	+18% AgroStar 6.38
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, hydraulic-dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	15.3 gpm · 58.0 L/min	14.9 gpm · 56.5 L/min	—
Pressure declared	—	3,046–3,118 psi · 210–215 bar	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,229 lb · 4,640 kg	11,839 lb · 5,370 kg	+16% F-120 DT
Maximum permissible mass declared	18,739 lb · 8,500 kg	17,857 lb · 8,100 kg	—
Wheelbase declared	107.0 in · 2,718 mm	106.0 in · 2,692 mm	—
Length declared	179.4 in · 4,556 mm	185.4 in · 4,710 mm	—
Width declared	97.2 in · 2,470 mm	91.3 in · 2,320 mm	+6% AgroStar 6.38
Height declared	110.9 in · 2,818 mm	109.4 in · 2,780 mm	—
Ground clearance declared	20.9 in · 530 mm	19.9 in · 505 mm	—
Turning radius, braked declared	—	16.3 ft · 4.96 m	—
Fuel tank declared	179.6 qt · 170 L	232.5 qt · 220.0 L	+29% F-120 DT

Source

Source