Deutz-Fahr AgroStar 6.08 vs Eicher 3108
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the AgroStar 6.08 and the 3108 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | AgroStar 6.08 | 3108 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.7 hp | 106 hp | — |
| Engine declared | KHD F6L 913 | Eicher EDL 6 - 4 | differs |
| Displacement declared | 6.13 L | 5.89 L | — |
| Maximum torque declared | 282 lb·ft · 382 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | — | Single-plate dry clutch with centrifugal cooling | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.2 gpm · 57.5 L/min | 13.4 gpm · 50.6 L/min | +14% AgroStar 6.08 |
| Three-point lift at ends declared | 11,464 lb · 5,200 kg | — | — |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,009 lb · 4,540 kg | 11,905 lb · 5,400 kg | +19% 3108 |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | — | — |
| Wheelbase declared | 107.0 in · 2,718 mm | 107.5 in · 2,730 mm | — |
| Length declared | 179.4 in · 4,556 mm | 167.7 in · 4,260 mm | +7% AgroStar 6.08 |
| Width declared | 90.2 in · 2,290 mm | 92.3 in · 2,345 mm | — |
| Height declared | 110.9 in · 2,818 mm | 108.3 in · 2,750 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 18.5 in · 470 mm | +13% AgroStar 6.08 |
| Fuel tank declared | 179.6 qt · 170 L | 254.7 qt · 241 L | +42% 3108 |
Deutz-Fahr AgroStar 6.08 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 6.08”
- Source: Traktorenlexikon, “Deutz-Fahr DX 120”
Eicher 3108 sources
Source
- Source: Traktorenlexikon, “Eicher 3108”