8 material differences · fewer than 12
Tractor oneDeutz-Fahr AgroStar 4.711990–1993No measured PTO figureTractor twoMassey Ferguson MF 26251985–1986No measured PTO figure
Which should you choose?
Read our verdict on the AgroStar 4.71 and the MF 2625 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | AgroStar 4.71 | MF 2625 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | KHD BF4L 913 | Perkins A 6.354-4 | differs |
| Displacement declared | 4.09 L | 5.80 L | +42% MF 2625 |
| Maximum torque declared | 270 lb·ft · 366 N·m | 269 lb·ft · 365 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.0 gpm · 49.2 L/min | — | — |
| Three-point lift, at the coupling points declared | 11,464 lb · 5,200 kg | 12,081 lb · 5,480 kg | +5% MF 2625 |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,259 lb · 4,200 kg | 12,015 lb · 5,450 kg | +30% MF 2625 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 96.5 in · 2,450 mm | 107.3 in · 2,726 mm | +11% MF 2625 |
| Length declared | 168.2 in · 4,272 mm | 200.0 in · 5,080 mm | +19% MF 2625 |
| Width declared | 90.2 in · 2,290 mm | 91.3 in · 2,320 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | 17.7 in · 450 mm | — |
| Turning radius, braked declared | — | 16.1 ft · 4.90 m | — |
| Fuel tank declared | — | 225.1 qt · 213.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr AgroStar 4.71 sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.71”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
Massey Ferguson MF 2625 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2625”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”