Deutz-Fahr AgroStar 4.71 or Massey Ferguson MF 6255 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the AgroStar 4.71 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6255 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson MF 6255 (A) suits road haulage better on this data: 17% (1,300 kg / 2,866 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | AgroStar 4.71 | MF 6255 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 69.9 kW (93.7 hp)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 69.9 kW (93.7 hp)Traktorenlexikon, “Massey Ferguson MF 6255” | Not comparableNot comparable on power at the PTO shaft: the AgroStar 4.71 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6255 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroStar 4.71 and the MF 6255 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the AgroStar 4.71 and the MF 6255 (A). |
| Which pumps more oil for implements? | 49.2 L/min (13.0 gpm)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 95.7 L/min (25.3 gpm)Traktorenlexikon, “Massey Ferguson MF 6255” | AheadThe Massey Ferguson MF 6255 (A) has 95% more hydraulic flow (46.5 L/min / 12.3 gpm) than the Deutz-Fahr AgroStar 4.71 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 4,250 kg (9,370 lb)Traktorenlexikon, “Massey Ferguson MF 6255” | AheadThe Deutz-Fahr AgroStar 4.71 has 22% more lift (950 kg / 2,094 lb) than the Massey Ferguson MF 6255 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,200 kg (9,259 lb)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 4,195 kg (9,248 lb)Traktorenlexikon, “Massey Ferguson MF 6255” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 8,800 kg (19,401 lb)Traktorenlexikon, “Massey Ferguson MF 6255” | AheadThe Massey Ferguson MF 6255 (A) has 17% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Deutz-Fahr AgroStar 4.71 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 18Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 16 to 32Traktorenlexikon, “Massey Ferguson MF 6255” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the AgroStar 4.71 and the MF 6255 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6255” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6255” | AheadThe Deutz-Fahr AgroStar 4.71 offers 750 rpm at the PTO, which the Massey Ferguson MF 6255 (A) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr AgroStar 4.71” | independentTraktorenlexikon, “Massey Ferguson MF 6255” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr AgroStar 4.71” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 6255” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1990–1993 | 1999–2003 | Ahead (a fact, not an advantage)The Massey Ferguson MF 6255 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 6255 (A) has 95% more hydraulic flow (46.5 L/min / 12.3 gpm) than the Deutz-Fahr AgroStar 4.71 (both pump flow, as stated by the source).
- The Deutz-Fahr AgroStar 4.71 has 22% more lift (950 kg / 2,094 lb) than the Massey Ferguson MF 6255 (A) (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson MF 6255 (A) has 17% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Deutz-Fahr AgroStar 4.71 (both maximum permissible mass, as stated by the source).
- The Deutz-Fahr AgroStar 4.71 offers 750 rpm at the PTO, which the Massey Ferguson MF 6255 (A) does not (as stated by the sources).
- The Massey Ferguson MF 6255 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the AgroStar 4.71 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6255 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources