Deutz-Fahr AgroStar 4.68 vs Massey Ferguson MF 6140 (A)

7 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 4.68 and the MF 6140 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 4.68 and Massey Ferguson MF 6140 (A), field by field
Field	AgroStar 4.68	MF 6140 (A)	Gap
Engine
Engine power, claimed claimed	90 hp	88.8 hp	—
Engine declared	KHD BF4L 913	Perkins 1004.4 T2	differs
Displacement declared	4.09 L	3.99 L	—
Maximum torque declared	259 lb·ft · 351 N·m	249 lb·ft · 338 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Mechanically operated dry Valeo single-plate clutch	—
Hydraulics & hitch
Pump flow declared	13.0 gpm · 49.2 L/min	13.6 gpm · 51.5 L/min	—
Pressure declared	—	2,727 psi · 188 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	7,688 lb · 3,487 kg	+9% AgroStar 4.68
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,259 lb · 4,200 kg	8,069 lb · 3,660 kg	+15% AgroStar 4.68
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	96.5 in · 2,450 mm	93.3 in · 2,371 mm	—
Length declared	168.2 in · 4,272 mm	158.2 in · 4,019 mm	+6% AgroStar 4.68
Width declared	90.2 in · 2,290 mm	72.8 in · 1,850 mm	+24% AgroStar 4.68
Height declared	108.7 in · 2,762 mm	104.5 in · 2,654 mm	—
Ground clearance declared	18.3 in · 465 mm	14.1 in · 357 mm	+30% AgroStar 4.68
Fuel tank declared	139.5 qt · 132 L	137.4 qt · 130.0 L	—

Source

Source