Deutz-Fahr AgroPrima 6.16 or John Deere 3650 A?

Which should you choose?

The figures split: the Deutz-Fahr AgroPrima 6.16 is ahead on three-point lift and PTO speeds; the John Deere 3650A is ahead on maximum permissible mass.

  • The Deutz-Fahr AgroPrima 6.16 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.
  • The Deutz-Fahr AgroPrima 6.16 suits loader and hydraulic implement work better on this data: 15% (674 kg / 1,486 lb) more three-point lift.
  • The John Deere 3650A suits road haulage better on this data: 11% (800 kg / 1,764 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroPrima 6.16 and John Deere 3650 A, with the call on each
QuestionAgroPrima 6.163650 ACall
Which puts more power through the PTO shaft?76 kW (102 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”77.2 kW (104 hp)Traktorenlexikon, “John Deere 3650”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 6.16 and the 3650 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the AgroPrima 6.16 and the 3650 A.
Which pumps more oil for implements?—55.0 L/min (14.5 gpm)Traktorenlexikon, “John Deere 3650”No figureNo call on hydraulic flow: no figure on record for the AgroPrima 6.16.
Which lifts more on the three-point hitch?5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”4,526 kg (9,978 lb)Traktorenlexikon, “John Deere 3650”AheadThe Deutz-Fahr AgroPrima 6.16 has 15% more lift (674 kg / 1,486 lb) than the John Deere 3650A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,450 kg (9,811 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”4,985 kg (10,990 lb)Traktorenlexikon, “John Deere 3650”Ahead (a fact, not an advantage)The John Deere 3650A is 12% heavier (535 kg / 1,179 lb) than the Deutz-Fahr AgroPrima 6.16 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”8,300 kg (18,298 lb)Traktorenlexikon, “John Deere 3650”AheadThe John Deere 3650A has 11% higher maximum permissible mass (800 kg / 1,764 lb) than the Deutz-Fahr AgroPrima 6.16 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”16Traktorenlexikon, “John Deere 3650”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the AgroPrima 6.16 and the 3650 A.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “John Deere 3650”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”540/1000 rpmTraktorenlexikon, “John Deere 3650”AheadThe Deutz-Fahr AgroPrima 6.16 offers 750 rpm at the PTO, which the John Deere 3650A does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”independentTraktorenlexikon, “John Deere 3650”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”4WDTraktorenlexikon, “John Deere 3650”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–19951986–1993Ahead (a fact, not an advantage)The Deutz-Fahr AgroPrima 6.16 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroPrima 6.16 has 15% more lift (674 kg / 1,486 lb) than the John Deere 3650A (both lift at the hitch ends, as stated by the source).
  • The John Deere 3650A is 12% heavier (535 kg / 1,179 lb) than the Deutz-Fahr AgroPrima 6.16 (both unladen weight, as stated by the source).
  • The John Deere 3650A has 11% higher maximum permissible mass (800 kg / 1,764 lb) than the Deutz-Fahr AgroPrima 6.16 (both maximum permissible mass, as stated by the source).
  • The Deutz-Fahr AgroPrima 6.16 offers 750 rpm at the PTO, which the John Deere 3650A does not (as stated by the sources).
  • The Deutz-Fahr AgroPrima 6.16 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.

← Every figure for both machines, side by side, with sources