Deutz-Fahr AgroPrima 6.16 or Hürlimann 110 XT?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Hürlimann 110 XT is ahead on forward gears; the Deutz-Fahr AgroPrima 6.16 is ahead on PTO speeds.

  • The Deutz-Fahr AgroPrima 6.16 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroPrima 6.16 and Hürlimann 110 XT, with the call on each
QuestionAgroPrima 6.16110 XTCall
Which puts more power through the PTO shaft?76 kW (102 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”74.6 kW (100.0 hp)Traktorenlexikon, “Hürlimann XT 110”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 6.16 and the 110 XT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the AgroPrima 6.16 and the 110 XT.
Which pumps more oil for implements?41.5 L/min (11.0 gpm)Traktorenlexikon, “Hürlimann XT 110”No figureNo call on hydraulic flow: no figure on record for the AgroPrima 6.16.
Which lifts more on the three-point hitch?5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”3,997 kg (8,813 lb)Traktorenlexikon, “Hürlimann XT 110”Not comparableNot comparable on three-point lift: the AgroPrima 6.16: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”); the 110 XT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 110”) — not the same quantity, basis and condition.
Which is heavier, for traction?4,450 kg (9,811 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”4,650 kg (10,251 lb)Traktorenlexikon, “Hürlimann XT 110”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”7,200 kg (15,873 lb)Traktorenlexikon, “Hürlimann XT 110”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”45Traktorenlexikon, “Hürlimann XT 110”AheadThe Hürlimann 110 XT has 150% more forward gears (27 gears) than the Deutz-Fahr AgroPrima 6.16 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the AgroPrima 6.16 and the 110 XT.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 110”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 110”AheadThe Deutz-Fahr AgroPrima 6.16 offers 750 rpm at the PTO, which the Hürlimann 110 XT does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”No figureNo call on PTO independence: not stated for the 110 XT.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroPrima 6.16”4WDTraktorenlexikon, “Hürlimann XT 110”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–19952005–Ahead (a fact, not an advantage)The Hürlimann 110 XT is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann 110 XT has 150% more forward gears (27 gears) than the Deutz-Fahr AgroPrima 6.16 (both forward gears, as stated by the source).
  • The Deutz-Fahr AgroPrima 6.16 offers 750 rpm at the PTO, which the Hürlimann 110 XT does not (as stated by the sources).
  • The Hürlimann 110 XT is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on three-point lift: the AgroPrima 6.16: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.16”); the 110 XT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 110”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources