Deutz-Fahr AgroPrima 6.06 or Fendt Farmer 410 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Farmer 410 Vario suits road haulage better on this data: 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroPrima 6.06 and Fendt Farmer 410 Vario, with the call on each
QuestionAgroPrima 6.06Farmer 410 VarioCall
Which puts more power through the PTO shaft?74 kW (99 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”74 kW (99 hp)Traktorenlexikon, “Fendt Farmer 410 Vario”Not comparableNot comparable on power at the PTO shaft: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 6.06 and the Farmer 410 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the AgroPrima 6.06 and the Farmer 410 Vario.
Which pumps more oil for implements?47.0 L/min (12.4 gpm)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”No figureNo call on hydraulic flow: no figure on record for the Farmer 410 Vario.
Which lifts more on the three-point hitch?3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”6,568 kg (14,480 lb)Traktorenlexikon, “Fendt Farmer 410 Vario”Not comparableNot comparable on three-point lift: the AgroPrima 6.06: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”); the Farmer 410 Vario: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 410 Vario”) — not the same quantity, basis and condition.
Which is heavier, for traction?4,450 kg (9,811 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”4,950 kg (10,913 lb) to 5,210 kg (11,486 lb)Traktorenlexikon, “Fendt Farmer 410 Vario”Ahead (a fact, not an advantage)The Fendt Farmer 410 Vario is 11% heavier (500 kg / 1,102 lb) than the Deutz-Fahr AgroPrima 6.06 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”No figureNo call on maximum permissible mass: no figure on record for the Farmer 410 Vario.
Which has the wider choice of gears?15 to 18 forwardTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06”Stepless (CVT)Traktorenlexikon, “Fendt Farmer 410 Vario”DifferTransmissions differ in kind: the Deutz-Fahr AgroPrima 6.06 has 15 to 18 forward gears and the Fendt Farmer 410 Vario is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the AgroPrima 6.06 and the Farmer 410 Vario.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”50 km/h (31.1 mph)Traktorenlexikon, “Fendt Farmer 410 Vario”AheadThe Fendt Farmer 410 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr AgroPrima 6.06 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06”540/540E/1000 rpmTraktorenlexikon, “Fendt Farmer 410 Vario”AheadThe Deutz-Fahr AgroPrima 6.06 offers 750 rpm at the PTO, which the Fendt Farmer 410 Vario does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06”No figureNo call on PTO independence: not stated for the Farmer 410 Vario.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06”4WDTraktorenlexikon, “Fendt Farmer 410 Vario”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19951999–2006Ahead (a fact, not an advantage)The Fendt Farmer 410 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Farmer 410 Vario is 11% heavier (500 kg / 1,102 lb) than the Deutz-Fahr AgroPrima 6.06 (both unladen weight, as stated by the source).
  • The Fendt Farmer 410 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr AgroPrima 6.06 (both top speed forward, as stated by the source).
  • The Deutz-Fahr AgroPrima 6.06 offers 750 rpm at the PTO, which the Fendt Farmer 410 Vario does not (as stated by the sources).
  • The Fendt Farmer 410 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Transmissions differ in kind: the Deutz-Fahr AgroPrima 6.06 has 15 to 18 forward gears and the Fendt Farmer 410 Vario is stepless (CVT) — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the AgroPrima 6.06: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”); the Farmer 410 Vario: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 410 Vario”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources