Deutz-Fahr AgroPrima 6.06 or Fendt 411 Vario?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 411 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 411 Vario suits loader and hydraulic implement work better on this data: 60% (28.0 L/min / 7.4 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | AgroPrima 6.06 | 411 Vario | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 74 kW (99 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 74 kW (99 hp)Traktorenlexikon, “Fendt 411 Vario” | Not comparableNot comparable on power at the PTO shaft: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 411 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 6.06 and the 411 Vario. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the AgroPrima 6.06 and the 411 Vario. |
| Which pumps more oil for implements? | 47.0 L/min (12.4 gpm)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 75.0 L/min (19.8 gpm)Traktorenlexikon, “Fendt 411 Vario” | AheadThe Fendt 411 Vario has 60% more hydraulic flow (28.0 L/min / 7.4 gpm) than the Deutz-Fahr AgroPrima 6.06 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 6,646 kg (14,652 lb)Traktorenlexikon, “Fendt 411 Vario” | Not comparableNot comparable on three-point lift: the AgroPrima 6.06: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”); the 411 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 411 Vario”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,450 kg (9,811 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 5,400 kg (11,905 lb)Traktorenlexikon, “Fendt 411 Vario” | Ahead (a fact, not an advantage)The Fendt 411 Vario is 21% heavier (950 kg / 2,094 lb) than the Deutz-Fahr AgroPrima 6.06 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | — | No figureNo call on maximum permissible mass: no figure on record for the 411 Vario. |
| Which has the wider choice of gears? | 15 to 18 forwardTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | Stepless (CVT)Traktorenlexikon, “Fendt 411 Vario” | DifferTransmissions differ in kind: the Deutz-Fahr AgroPrima 6.06 has 15 to 18 forward gears and the Fendt 411 Vario is stepless (CVT) — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the AgroPrima 6.06 and the 411 Vario. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt 411 Vario” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 540/540E/1000 rpmTraktorenlexikon, “Fendt 411 Vario” | AheadThe Deutz-Fahr AgroPrima 6.06 offers 750 rpm at the PTO, which the Fendt 411 Vario does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | — | No figureNo call on PTO independence: not stated for the 411 Vario. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr AgroPrima 6.06” | 4WDTraktorenlexikon, “Fendt 411 Vario” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1991–1995 | 2006–2013 | Ahead (a fact, not an advantage)The Fendt 411 Vario is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 411 Vario has 60% more hydraulic flow (28.0 L/min / 7.4 gpm) than the Deutz-Fahr AgroPrima 6.06 (both pump flow, as stated by the source).
- The Fendt 411 Vario is 21% heavier (950 kg / 2,094 lb) than the Deutz-Fahr AgroPrima 6.06 (both unladen weight, as stated by the source).
- The Deutz-Fahr AgroPrima 6.06 offers 750 rpm at the PTO, which the Fendt 411 Vario does not (as stated by the sources).
- The Fendt 411 Vario is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Transmissions differ in kind: the Deutz-Fahr AgroPrima 6.06 has 15 to 18 forward gears and the Fendt 411 Vario is stepless (CVT) — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the AgroPrima 6.06 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 411 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the AgroPrima 6.06: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr AgroPrima 6.06”); the 411 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 411 Vario”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources