Deutz-Fahr AgroPrima 4.56 or SAME Silver 100.6 DT?

Which should you choose?

On performance, every comparable figure that differs favours the SAME Silver 100.6 DT: hydraulic flow. On features, the Deutz-Fahr AgroPrima 4.56 is ahead on PTO speeds.

  • The Deutz-Fahr AgroPrima 4.56 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.
  • The SAME Silver 100.6 DT suits loader and hydraulic implement work better on this data: 34% (14.6 L/min / 3.9 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroPrima 4.56 and SAME Silver 100.6 DT, with the call on each
QuestionAgroPrima 4.56Silver 100.6 DTCall
Which puts more power through the PTO shaft?64 kW (86 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”64.0 kW (85.8 hp)Traktorenlexikon, “SAME Silver 100.6”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 4.56 and the Silver 100.6 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the AgroPrima 4.56 and the Silver 100.6 DT.
Which pumps more oil for implements?42.4 L/min (11.2 gpm)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”57.0 L/min (15.1 gpm)Traktorenlexikon, “SAME Silver 100.6”AheadThe SAME Silver 100.6 DT has 34% more hydraulic flow (14.6 L/min / 3.9 gpm) than the Deutz-Fahr AgroPrima 4.56 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”No figureNo call on three-point lift: no figure on record for the Silver 100.6 DT.
Which is heavier, for traction?3,780 kg (8,333 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”4,480 kg (9,877 lb)Traktorenlexikon, “SAME Silver 100.6”Ahead (a fact, not an advantage)The SAME Silver 100.6 DT is 19% heavier (700 kg / 1,543 lb) than the Deutz-Fahr AgroPrima 4.56 (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,600 kg (14,551 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”7,000 kg (15,432 lb)Traktorenlexikon, “SAME Silver 100.6”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”15 to 60Traktorenlexikon, “SAME Silver 100.6”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the AgroPrima 4.56 and the Silver 100.6 DT.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.56”40 km/h (24.9 mph)Traktorenlexikon, “SAME Silver 100.6”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 4.56”540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Silver 100.6”AheadThe Deutz-Fahr AgroPrima 4.56 offers 750 rpm at the PTO, which the SAME Silver 100.6 DT does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroPrima 4.56”independentTraktorenlexikon, “SAME Silver 100.6”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr AgroPrima 4.56”4WDTraktorenlexikon, “SAME Silver 100.6”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19951995–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Silver 100.6 DT has 34% more hydraulic flow (14.6 L/min / 3.9 gpm) than the Deutz-Fahr AgroPrima 4.56 (both pump flow, as stated by the source).
  • The SAME Silver 100.6 DT is 19% heavier (700 kg / 1,543 lb) than the Deutz-Fahr AgroPrima 4.56 (both unladen weight, as stated by the source).
  • The Deutz-Fahr AgroPrima 4.56 offers 750 rpm at the PTO, which the SAME Silver 100.6 DT does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.

← Every figure for both machines, side by side, with sources