6 material differences · fewer than 12
Tractor oneDeutz-Fahr Agroplus 872006–2009No measured PTO figureTractor twoMassey Ferguson MF 5435 (A)2003–2011No measured PTO figure
Which should you choose?
Read our verdict on the Agroplus 87 and the MF 5435 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Agroplus 87 | MF 5435 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 81.9 hp | 81.9 hp | — |
| Engine declared | SLH 1.000.4 WT | Perkins 1104 C-44 | differs |
| Displacement declared | 4.00 L | 4.40 L | +10% MF 5435 (A) |
| Maximum torque declared | 257 lb·ft · 348 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Mechanically operated, dry Borg & Beck single clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 14.3 gpm · 54.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,952 lb · 2,700 kg | 8,697 lb · 3,945 kg | +46% MF 5435 (A) |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | 16,667 lb · 7,560 kg | +68% MF 5435 (A) |
| Wheelbase declared | 88.0 in · 2,235 mm | 97.0 in · 2,463 mm | +10% MF 5435 (A) |
| Length declared | 140.2 in · 3,560 mm | 166.1 in · 4,220 mm | +19% MF 5435 (A) |
| Width declared | 82.7 in · 2,100 mm | 79.3 in · 2,014 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 18.3 in · 464 mm | — |
| Fuel tank declared | 95.1 qt · 90 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agroplus 87 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 87”
Massey Ferguson MF 5435 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5435”
- Source: Traktorenlexikon, “Massey Ferguson MF 5425”