11 material differences · fewer than 12

Tractor oneDeutz-Fahr Agroplus 802001–2005No measured PTO figureTractor twoNew Holland T-40302008–2012No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 80 and the T-4030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 80 and New Holland T-4030, field by field
Field	Agroplus 80	T-4030	Gap
Engine
Engine power, claimed claimed	76.0 hp	77.0 hp	—
Engine declared	KHD F4L 913 or F4L 914	IVECO F5 AE 9484 B (Tier-III)	differs
Displacement declared	—	3.20 L	—
Maximum torque declared	204 lb·ft · 276 N·m	229 lb·ft · 311 N·m	+13% T-4030
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Mechanically-operated dry Borg & Beck single clutch, type: 305	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.7 gpm · 48.0 L/min	13.7 gpm · 52.0 L/min	+8% T-4030
Pressure declared	2,031 psi · 140 bar	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,063 lb · 2,750 kg	6,779 lb · 3,075 kg	+12% T-4030
Maximum permissible mass declared	9,921 lb · 4,500 kg	11,574 lb · 5,250 kg	+17% T-4030
Wheelbase declared	88.0 in · 2,235 mm	82.6 in · 2,098 mm	+7% Agroplus 80
Length declared	159.8 in · 4,060 mm	143.2 in · 3,637 mm	+12% Agroplus 80
Width declared	79.1 in · 2,008 mm	73.5–95.6 in · 1,867–2,428 mm	differs
Height, over the cab declared	96.7 in · 2,455 mm	92.1 in · 2,340 mm	—
Ground clearance declared	17.5 in · 445 mm	15.0 in · 380 mm	+17% Agroplus 80
Turning radius, braked declared	—	11.1 ft · 3.37 m	—
Fuel tank declared	95.1 qt · 90 L	79.3 qt · 75.0 L	+20% Agroplus 80

Source

Source