Deutz-Fahr Agroplus 80 vs Massey Ferguson MF 390 (A)

9 material differences · fewer than 12

Tractor one

2001–2005

No measured PTO figure

Tractor two

1987–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 80 and the MF 390 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 80 and Massey Ferguson MF 390 (A), field by field
Field	Agroplus 80	MF 390 (A)	Gap
Engine
Engine power, claimed claimed	76.0 hp	76.0 hp	—
Engine declared	KHD F4L 913 or F4L 914	Perkins A 4.248	differs
Displacement declared	—	4.07 L	—
Maximum torque declared	204 lb·ft · 276 N·m	200 lb·ft · 271 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Mechanically-operated dry Borg & Beck single clutch, type: 305	pedal-operated dry and air-cooled single clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.7 gpm · 48.0 L/min	16.7 gpm · 63.3 L/min	+32% MF 390 (A)
Pressure declared	2,031 psi · 140 bar	2,466 psi · 170 bar	+21% MF 390 (A)
Three-point lift at ends declared	—	6,746 lb · 3,060 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,063 lb · 2,750 kg	6,601 lb · 2,994 kg	+9% MF 390 (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	88.0 in · 2,235 mm	84.1 in · 2,136 mm	—
Length declared	159.8 in · 4,060 mm	144.5 in · 3,670 mm	+11% Agroplus 80
Width declared	79.1 in · 2,008 mm	76.4 in · 1,940 mm	—
Height declared	96.7 in · 2,455 mm	97.2 in · 2,470 mm	—
Ground clearance declared	17.5 in · 445 mm	11.6 in · 295 mm	+51% Agroplus 80
Fuel tank declared	95.1 qt · 90 L	114.1 qt · 108 L	+20% MF 390 (A)

Source

Source