Deutz-Fahr Agroplus 75 or Fendt Farmer 304 LS/Turbo?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 304 LS/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agroplus 75 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agroplus 75 | Farmer 304 LS/Turbo | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 75” | 55.2 kW (74 hp)Traktorenlexikon, “Fendt Farmer 304 LS/Turbo” | Not comparableNot comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 304 LS/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 75 and the Farmer 304 LS/Turbo. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agroplus 75 and the Farmer 304 LS/Turbo. |
| Which pumps more oil for implements? | — | — | No figureNo call on hydraulic flow: no figure on record for the Agroplus 75 and the Farmer 304 LS/Turbo. |
| Which lifts more on the three-point hitch? | 3,600 kg (7,937 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75” | 2,860 kg (6,305 lb)Traktorenlexikon, “Fendt Farmer 304 LS/Turbo” | Not comparableNot comparable on three-point lift: the Agroplus 75: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agroplus 75”); the Farmer 304 LS/Turbo: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 304 LS/Turbo”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,430 kg (7,562 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75” | 3,295 kg (7,264 lb)Traktorenlexikon, “Fendt Farmer 304 LS/Turbo” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75” | — | No figureNo call on maximum permissible mass: no figure on record for the Farmer 304 LS/Turbo. |
| Which has the wider choice of gears? | 30Traktorenlexikon, “Deutz-Fahr Agroplus 75” | 21Traktorenlexikon, “Fendt Farmer 304 LS/Turbo” | AheadThe Deutz-Fahr Agroplus 75 has 43% more forward gears (9 gears) than the Fendt Farmer 304 LS/Turbo (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agroplus 75 and the Farmer 304 LS/Turbo. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 75” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 304 LS/Turbo” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 75” | 540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 304 LS/Turbo” | AheadThe Fendt Farmer 304 LS/Turbo offers 750 rpm at the PTO, which the Deutz-Fahr Agroplus 75 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Fendt Farmer 304 LS/Turbo” | No figureNo call on PTO independence: not stated for the Agroplus 75. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 75” | 2WDTraktorenlexikon, “Fendt Farmer 304 LS/Turbo” | AheadThe Deutz-Fahr Agroplus 75 is available with four-wheel drive; the Fendt Farmer 304 LS/Turbo is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1997–2005 | 1990–1998 | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 75 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agroplus 75 has 43% more forward gears (9 gears) than the Fendt Farmer 304 LS/Turbo (both forward gears, as stated by the source).
- The Fendt Farmer 304 LS/Turbo offers 750 rpm at the PTO, which the Deutz-Fahr Agroplus 75 does not (as stated by the sources).
- The Deutz-Fahr Agroplus 75 is available with four-wheel drive; the Fendt Farmer 304 LS/Turbo is two-wheel drive (as stated by the sources).
- The Deutz-Fahr Agroplus 75 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Not comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 304 LS/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agroplus 75: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agroplus 75”); the Farmer 304 LS/Turbo: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 304 LS/Turbo”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources