Deutz-Fahr Agroplus 75 vs Deutz-Fahr Agrotron 4.80
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agroplus 75 and the Agrotron 4.80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | Agroplus 75 | Agrotron 4.80 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74.0 hp | — |
| Engine declared | — | Deutz BF 4 M 1012 E | — |
| Displacement declared | — | 3.19 L | — |
| Maximum torque declared | 218 lb·ft · 295 N·m | 214 lb·ft · 290 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | — | 17.4 gpm · 66.0 L/min | — |
| Three-point lift at ends declared | 7,937 lb · 3,600 kg | 13,713 lb · 6,220 kg | +73% Agrotron 4.80 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,562 lb · 3,430 kg | 8,752 lb · 3,970 kg | +16% Agrotron 4.80 |
| Maximum permissible mass declared | 13,669 lb · 6,200 kg | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 93.7 in · 2,380 mm | 95.2 in · 2,419 mm | — |
| Length declared | 145.7 in · 3,700 mm | 157.7 in · 4,005 mm | +8% Agrotron 4.80 |
| Width declared | 81.1 in · 2,060 mm | 79.1 in · 2,008 mm | — |
| Height declared | 103.3 in · 2,624 mm | 107.1 in · 2,720 mm | — |
| Ground clearance declared | 15.4–19.8 in · 392–502 mm | 18.7 in · 475 mm | differs |
| Fuel tank declared | 147.9 qt · 140 L | 190.2 qt · 180 L | +29% Agrotron 4.80 |
Deutz-Fahr Agroplus 75 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 75”
Deutz-Fahr Agrotron 4.80 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 4.80”
- Source: Traktorenlexikon, “Fendt Farmer 307 C”