Deutz-Fahr Agroplus 70 or John Deere 2300 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2300 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agroplus 70 | 2300 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 51.5 kW (69.1 hp)Traktorenlexikon, “John Deere 2300” | Not comparableNot comparable on power at the PTO shaft: the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2300 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 70 and the 2300 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agroplus 70 and the 2300 (A). |
| Which pumps more oil for implements? | 44.7 L/min (11.8 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 40.2 L/min (10.6 gpm)Traktorenlexikon, “John Deere 2300” | AheadThe Deutz-Fahr Agroplus 70 has 11% more hydraulic flow (4.5 L/min / 1.2 gpm) than the John Deere 2300 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,900 kg (6,393 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 4,030 kg (8,885 lb)Traktorenlexikon, “John Deere 2300” | AheadThe John Deere 2300 (A) has 39% more lift (1,130 kg / 2,491 lb) than the Deutz-Fahr Agroplus 70 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,750 kg (6,063 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 3,260 kg (7,187 lb)Traktorenlexikon, “John Deere 2300” | Ahead (a fact, not an advantage)The John Deere 2300 (A) is 19% heavier (510 kg / 1,124 lb) than the Deutz-Fahr Agroplus 70 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 5,600 kg (12,346 lb)Traktorenlexikon, “John Deere 2300” | AheadThe John Deere 2300 (A) has 24% higher maximum permissible mass (1,100 kg / 2,425 lb) than the Deutz-Fahr Agroplus 70 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 20Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 10Traktorenlexikon, “John Deere 2300” | Sources disagreeNo call on forward gears: sources disagree on the figure for the Agroplus 70. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agroplus 70 and the 2300 (A). |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 70” | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 2300” | AheadThe Deutz-Fahr Agroplus 70 has 33% more top speed (10.0 km/h / 6.2 mph) than the John Deere 2300 (A) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 70” | 540/1000 rpmTraktorenlexikon, “John Deere 2300” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agroplus 70” | independentTraktorenlexikon, “John Deere 2300” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 70”; OECD test report 1686, 1997 | 2WD / 4WDTraktorenlexikon, “John Deere 2300” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1997–2005 | 1993–1996 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agroplus 70 has 11% more hydraulic flow (4.5 L/min / 1.2 gpm) than the John Deere 2300 (A) (both pump flow, as stated by the source).
- The John Deere 2300 (A) has 39% more lift (1,130 kg / 2,491 lb) than the Deutz-Fahr Agroplus 70 (both lift at the hitch ends, as stated by the source).
- The John Deere 2300 (A) is 19% heavier (510 kg / 1,124 lb) than the Deutz-Fahr Agroplus 70 (both unladen weight, as stated by the source).
- The John Deere 2300 (A) has 24% higher maximum permissible mass (1,100 kg / 2,425 lb) than the Deutz-Fahr Agroplus 70 (both maximum permissible mass, as stated by the source).
- The Deutz-Fahr Agroplus 70 has 33% more top speed (10.0 km/h / 6.2 mph) than the John Deere 2300 (A) (both top speed forward, as stated by the source).
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2300 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No call on forward gears: sources disagree on the figure for the Agroplus 70.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources