Deutz-Fahr Agroplus 67 or VALMET 4400?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4400 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agroplus 67 suits loader and hydraulic implement work better on this data: 38% (15.0 L/min / 4.0 gpm) more hydraulic flow.
- The Deutz-Fahr Agroplus 67 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agroplus 67 | 4400 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 49.3 kW (66.1 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 49.3 kW (66.1 hp)Traktorenlexikon, “Valmet 4400” | Not comparableNot comparable on power at the PTO shaft: the Agroplus 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4400 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 67 and the 4400. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agroplus 67 and the 4400. |
| Which pumps more oil for implements? | 54.0 L/min (14.3 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 4400” | AheadThe Deutz-Fahr Agroplus 67 has 38% more hydraulic flow (15.0 L/min / 4.0 gpm) than the VALMET 4400 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 4400” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,600 kg (5,732 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 2,790 kg (6,151 lb)Traktorenlexikon, “Valmet 4400” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | — | No figureNo call on maximum permissible mass: no figure on record for the 4400. |
| Which has the wider choice of gears? | 20Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 8 to 12Traktorenlexikon, “Valmet 4400” | AheadThe Deutz-Fahr Agroplus 67 has 67% more forward gears (8 gears) than the VALMET 4400 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agroplus 67 and the 4400. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 67” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 4400” | AheadThe Deutz-Fahr Agroplus 67 has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4400 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 67” | 540E/540 rpmTraktorenlexikon, “Valmet 4400” | AheadThe Deutz-Fahr Agroplus 67 offers 1000 rpm at the PTO, which the VALMET 4400 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agroplus 67” | independentTraktorenlexikon, “Valmet 4400” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr Agroplus 67” | Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 4400” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2006–2009 | 1993–1996 | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 67 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agroplus 67 has 38% more hydraulic flow (15.0 L/min / 4.0 gpm) than the VALMET 4400 (both pump flow, as stated by the source).
- The Deutz-Fahr Agroplus 67 has 67% more forward gears (8 gears) than the VALMET 4400 (both forward gears, as stated by the source).
- The Deutz-Fahr Agroplus 67 has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 4400 (both top speed forward, as stated by the source).
- The Deutz-Fahr Agroplus 67 offers 1000 rpm at the PTO, which the VALMET 4400 does not (as stated by the sources).
- The Deutz-Fahr Agroplus 67 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agroplus 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4400 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources