8 material differences · fewer than 12
Tractor oneDeutz-Fahr Agroplus 60 (Traktorenlexikon)1997–2005No measured PTO figureTractor twoSAME Dorado 55 (DT)2000–2004No measured PTO figure
Which should you choose?
Read our verdict on the Agroplus 60 and the Dorado 55 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Agroplus 60 | Dorado 55 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | KHD F3L 913 or F3L 914 | SAME-DEUTZ-FAHR 1000.3 A 5 | differs |
| Displacement declared | — | 3.00 L | — |
| Maximum torque declared | 131 lb·ft · 177 N·m | 145 lb·ft · 197 N·m | +11% Dorado 55 (DT) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Mechanically operated, dry Borg & Beck single clutch, type: 305 | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 12.5 gpm · 47.5 L/min | — | — |
| Pressure declared | 2,031 psi · 140 bar | 3,118 psi · 215 bar | +54% Dorado 55 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,192 lb · 2,355 kg | 5,732 lb · 2,600 kg | +10% Dorado 55 (DT) |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | 11,023 lb · 5,000 kg | +11% Dorado 55 (DT) |
| Wheelbase declared | 82.9 in · 2,105 mm | 82.9 in · 2,105 mm | — |
| Length declared | 154.7 in · 3,930 mm | 145.7 in · 3,700 mm | +6% Agroplus 60 |
| Width declared | 79.1 in · 2,008 mm | 70.5–87.8 in · 1,790–2,230 mm | differs |
| Ground clearance declared | 16.7 in · 425 mm | 17.5 in · 445 mm | — |
| Turning radius, braked declared | — | 10.0 ft · 3.06 m | — |
| Fuel tank declared | 95.1 qt · 90 L | 95.1 qt · 90.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agroplus 60 (Traktorenlexikon) sources
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 60”
SAME Dorado 55 (DT) sources
- Source: Traktorenlexikon, “SAME Dorado 55”
- Source: Traktorenlexikon, “SAME Dorado 60”