12 material differences

Tractor oneDeutz-Fahr Agroplus 60 (Traktorenlexikon)1997–2005No measured PTO figureTractor twoJohn Deere 5225 (A)2005–2008No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 60 and the 5225 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 60 (Traktorenlexikon) and John Deere 5225 (A), field by field
FieldAgroplus 605225 (A)Gap
Engine
Engine power, claimed claimed55.3 hp55.3 hp—
Engine declaredKHD F3L 913 or F3L 914John Deere-PowerTech 5.030 T 027differs
Displacement declared—3.05 L—
Maximum torque declared131 lb·ft · 177 N·m158 lb·ft · 214 N·m+21% 5225 (A)
Transmission
Top speed declared24.9 mph · 40 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredMechanically operated, dry Borg & Beck single clutch, type: 305Pedal operated dry double clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centreOpen centre—
Pump flow declared12.5 gpm · 47.5 L/min13.9 gpm · 52.6 L/min+11% 5225 (A)
Pressure declared2,031 psi · 140 bar2,973 psi · 205 bar+46% 5225 (A)
Three-point lift, at the coupling points declared6,393 lb · 2,900 kg4,685 lb · 2,125 kg+36% Agroplus 60
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared5,192 lb · 2,355 kg5,994 lb · 2,719 kg+15% 5225 (A)
Maximum permissible mass declared9,921 lb · 4,500 kg——
Wheelbase declared82.9 in · 2,105 mm85.7 in · 2,177 mm—
Length declared154.7 in · 3,930 mm136.9 in · 3,477 mm+13% Agroplus 60
Width declared79.1 in · 2,008 mm70.9 in · 1,800 mm+12% Agroplus 60
Ground clearance declared16.7 in · 425 mm18.1 in · 460 mm+8% 5225 (A)
Fuel tank declared95.1 qt · 90 L100.0 qt · 94.6 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agroplus 60 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agroplus 60”

John Deere 5225 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 5225”