Deutz-Fahr Agroplus 420 ( Profiline ) vs ZETOR 9641
13 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (30%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2009–2009; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Agroplus 420 ( Profiline ) | 9641 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 94 hp | 93.7 hp | — |
| Engine declared | Same 1000.4 WTI 2 E3 | SDF Z-1300 | differs |
| Displacement declared | 4.00 L | 4.16 L | — |
| Maximum torque declared | 275 lb·ft · 373 N·m | 254 lb·ft · 344 N·m | +8% Agroplus 420 ( Profiline ) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated single dry clutch | Pedal-operated, dry Zetor single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.8 gpm · 41.0 L/min | 15.3 gpm · 58.0 L/min | +41% 9641 |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Three-point lift at ends declared | — | 12,434 lb · 5,640 kg | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,518 lb · 3,410 kg | 9,766 lb · 4,430 kg | +30% 9641 |
| Maximum permissible mass declared | — | 14,771 lb · 6,700 kg | — |
| Wheelbase declared | 87.8 in · 2,230 mm | 94.0 in · 2,388 mm | +7% 9641 |
| Length declared | 140.2 in · 3,560 mm | 189.6 in · 4,815 mm | +35% 9641 |
| Width declared | 81.5–91.7 in · 2,070–2,330 mm | 85.2 in · 2,165 mm | differs |
| Height declared | 96.7 in · 2,455 mm | 106.9 in · 2,715 mm | +11% 9641 |
| Ground clearance declared | 15.4 in · 390 mm | 14.3 in · 362 mm | +8% Agroplus 420 ( Profiline ) |
| Turning radius, braked declared | 12.8 ft · 3.90 m | — | — |
| Fuel tank declared | 95.1 qt · 90 L | 190.2 qt · 180.0 L | +100% 9641 |
Deutz-Fahr Agroplus 420 ( Profiline ) sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 420”
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 410”
ZETOR 9641 sources
Source
- Source: Traktorenlexikon, “Zetor 9641 (1999-2002)”