10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agroplus 320from 2009No measured PTO figureTractor twoZETOR Proxima 8421/84412004–2007No measured PTO figure
Which should you choose?
Read our verdict on the Agroplus 320 and the Proxima 8421/8441 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agroplus 320 | Proxima 8421/8441 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80 hp | 80.9 hp | — |
| Engine declared | Same 1000.3 WTI 2 E3 | Zetor Z-1204 or Z-1205 (Tier-II or III) | differs |
| Displacement declared | 3.00 L | 4.16 L | +39% Proxima 8421/8441 |
| Maximum torque declared | 229 lb·ft · 310 N·m | 249 lb·ft · 338 N·m | +9% Proxima 8421/8441 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated single-plate dry clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.8 gpm · 41 L/min | 12.2 gpm · 46.0 L/min | +12% Proxima 8421/8441 |
| Pressure declared | — | 1,813 psi · 125 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,518 lb · 3,410 kg | 7,385 lb · 3,350 kg | — |
| Maximum permissible mass declared | — | 14,484 lb · 6,570 kg | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 91.4 in · 2,321 mm | +11% Proxima 8421/8441 |
| Length declared | 140.2 in · 3,560 mm | 189.1 in · 4,803 mm | +35% Proxima 8421/8441 |
| Width declared | 81.5–91.7 in · 2,070–2,330 mm | 78.3–88.6 in · 1,990–2,250 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 20.5 in · 520 mm | +33% Proxima 8421/8441 |
| Turning radius, braked declared | — | 11.8 ft · 3.60 m | — |
| Fuel tank declared | 95.1 qt · 90 L | 126.8 qt · 120.0 L | +33% Proxima 8421/8441 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agroplus 320 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 320”
ZETOR Proxima 8421/8441 sources
- Source: Traktorenlexikon, “Zetor Proxima 8421/8441”