11 material differences · fewer than 12
Tractor oneDeutz-Fahr Agroplus 320from 2009No measured PTO figureTractor twoZETOR 86411999–2002No measured PTO figure
Which should you choose?
Read our verdict on the Agroplus 320 and the 8641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agroplus 320 | 8641 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80 hp | 79.9 hp | — |
| Engine declared | Same 1000.3 WTI 2 E3 | ZETOR Z-1203 | differs |
| Displacement declared | 3.00 L | 4.16 L | +39% 8641 |
| Maximum torque declared | 229 lb·ft · 310 N·m | 230 lb·ft · 312 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated single-plate dry clutch | Pedal-operated dry Zetor single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.8 gpm · 41 L/min | 15.1 gpm · 57.0 L/min | +39% 8641 |
| Pressure declared | — | 1,813 psi · 125 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,518 lb · 3,410 kg | 9,678 lb · 4,390 kg | +29% 8641 |
| Maximum permissible mass declared | — | 14,771 lb · 6,700 kg | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 94.0 in · 2,388 mm | +14% 8641 |
| Length declared | 140.2 in · 3,560 mm | 189.6 in · 4,815 mm | +35% 8641 |
| Width declared | 81.5–91.7 in · 2,070–2,330 mm | 80.7–89.6 in · 2,050–2,275 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 13.4 in · 340 mm | +15% Agroplus 320 |
| Fuel tank declared | 95.1 qt · 90 L | 190.2 qt · 180.0 L | +100% 8641 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agroplus 320 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 320”
ZETOR 8641 sources
- Source: Traktorenlexikon, “Zetor 8641 (1999-2002)”