Deutz-Fahr Agroplus 320 or URSUS 6012/6014?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6012/6014 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The URSUS 6012/6014 suits loader and hydraulic implement work better on this data: 50% (20.3 L/min / 5.4 gpm) more hydraulic flow.
- The Deutz-Fahr Agroplus 320 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agroplus 320 | 6012/6014 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 60 kW (80 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 60.3 kW (80.9 hp)Traktorenlexikon, “Ursus 6012/6014” | Not comparableNot comparable on power at the PTO shaft: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6012/6014 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 320 and the 6012/6014. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agroplus 320 and the 6012/6014. |
| Which pumps more oil for implements? | 41 L/min (10.8 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 61.3 L/min (16.2 gpm)Traktorenlexikon, “Ursus 6012/6014” | AheadThe URSUS 6012/6014 has 50% more hydraulic flow (20.3 L/min / 5.4 gpm) than the Deutz-Fahr Agroplus 320 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 3,781 kg (8,336 lb)Traktorenlexikon, “Ursus 6012/6014” | Not comparableNot comparable on three-point lift: the Agroplus 320: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agroplus 320”); the 6012/6014: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ursus 6012/6014”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,410 kg (7,518 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 3,340 kg (7,363 lb)Traktorenlexikon, “Ursus 6012/6014” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agroplus 320 and the 6012/6014. |
| Which has the wider choice of gears? | 30Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 8 to 12Traktorenlexikon, “Ursus 6012/6014” | AheadThe Deutz-Fahr Agroplus 320 has 150% more forward gears (18 gears) than the URSUS 6012/6014 (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Deutz-Fahr Agroplus 320” | — | No figureNo call on a creeper range: not stated for the 6012/6014. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 30 km/h (18.6 mph)Traktorenlexikon, “Ursus 6012/6014” | AheadThe Deutz-Fahr Agroplus 320 has 33% more top speed (10.0 km/h / 6.2 mph) than the URSUS 6012/6014 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 320” | 540/1000 rpmTraktorenlexikon, “Ursus 6012/6014” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Ursus 6012/6014” | No figureNo call on PTO independence: not stated for the Agroplus 320. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 320” | 2WD / 4WDTraktorenlexikon, “Ursus 6012/6014” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2009– | 1997–2009 | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 320 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The URSUS 6012/6014 has 50% more hydraulic flow (20.3 L/min / 5.4 gpm) than the Deutz-Fahr Agroplus 320 (both pump flow, as stated by the source).
- The Deutz-Fahr Agroplus 320 has 150% more forward gears (18 gears) than the URSUS 6012/6014 (both forward gears, as stated by the source).
- The Deutz-Fahr Agroplus 320 has 33% more top speed (10.0 km/h / 6.2 mph) than the URSUS 6012/6014 (both top speed forward, as stated by the source).
- The Deutz-Fahr Agroplus 320 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6012/6014 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agroplus 320: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agroplus 320”); the 6012/6014: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ursus 6012/6014”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources