Deutz-Fahr Agroplus 320 or New Holland TLA 80 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TLA 80 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The New Holland TLA 80 (A) suits loader and hydraulic implement work better on this data: 52% (21.4 L/min / 5.7 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agroplus 320 | TLA 80 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 60 kW (80 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 60.3 kW (80.9 hp)Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | Not comparableNot comparable on power at the PTO shaft: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TLA 80 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 320 and the TLA 80 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agroplus 320 and the TLA 80 (A). |
| Which pumps more oil for implements? | 41 L/min (10.8 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 62.4 L/min (16.5 gpm)Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | AheadThe New Holland TLA 80 (A) has 52% more hydraulic flow (21.4 L/min / 5.7 gpm) than the Deutz-Fahr Agroplus 320 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | — | No figureNo call on three-point lift: no figure on record for the TLA 80 (A). |
| Which is heavier, for traction? | 3,410 kg (7,518 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 3,840 kg (8,466 lb)Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | Ahead (a fact, not an advantage)The New Holland TLA 80 (A) is 13% heavier (430 kg / 948 lb) than the Deutz-Fahr Agroplus 320 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 5,500 kg (12,125 lb)Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | No figureNo call on maximum permissible mass: no figure on record for the Agroplus 320. |
| Which has the wider choice of gears? | 30Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 12 to 24Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | YesTraktorenlexikon, “Deutz-Fahr Agroplus 320” | YesTraktorenlexikon, “New Holland TL 80 A (2004-2008)” | EvenEven on a creeper range: every machine offers one. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 320” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TL 80 A (2004-2008)” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 320” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TL 80 A (2004-2008)” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland TL 80 A (2004-2008)” | No figureNo call on PTO independence: not stated for the Agroplus 320. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 320” | Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TL 80 A (2004-2008)” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2009– | 2004–2008 | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 320 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TLA 80 (A) has 52% more hydraulic flow (21.4 L/min / 5.7 gpm) than the Deutz-Fahr Agroplus 320 (both pump flow, as stated by the source).
- The New Holland TLA 80 (A) is 13% heavier (430 kg / 948 lb) than the Deutz-Fahr Agroplus 320 (both unladen weight, as stated by the source).
- The Deutz-Fahr Agroplus 320 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on a creeper range: every machine offers one.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agroplus 320 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TLA 80 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and PTO independence.
← Every figure for both machines, side by side, with sources