12 material differences
Tractor oneDeutz-Fahr Agroplus 320from 2009No measured PTO figureTractor twoLamborghini 775-85 (DT)2004–2007No measured PTO figure
Which should you choose?
Read our verdict on the Agroplus 320 and the 775-85 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Agroplus 320 | 775-85 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80 hp | 79.9 hp | — |
| Engine declared | Same 1000.3 WTI 2 E3 | SAME 1000.4 W 1 (Tier-II) | differs |
| Displacement declared | 3.00 L | 4.00 L | +33% 775-85 (DT) |
| Maximum torque declared | 229 lb·ft · 310 N·m | 186 lb·ft · 252 N·m | +23% Agroplus 320 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated single-plate dry clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 10.8 gpm · 41 L/min | 11.9 gpm · 45.0 L/min | +10% 775-85 (DT) |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,518 lb · 3,410 kg | 6,096 lb · 2,765 kg | +23% Agroplus 320 |
| Wheelbase declared | 82.7 in · 2,100 mm | 92.9 in · 2,360 mm | +12% 775-85 (DT) |
| Length declared | 140.2 in · 3,560 mm | 154.3 in · 3,920 mm | +10% 775-85 (DT) |
| Width declared | 81.5–91.7 in · 2,070–2,330 mm | 77.2–96.9 in · 1,960–2,460 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 19.7 in · 500 mm | +28% 775-85 (DT) |
| Fuel tank declared | 95.1 qt · 90 L | 64.5 qt · 61.0 L | +48% Agroplus 320 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agroplus 320 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 320”
Lamborghini 775-85 (DT) sources
Source
- Source: Traktorenlexikon, “Lamborghini 774-85 N”