9 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrolux 802000–2005No measured PTO figureTractor twoMassey Ferguson MF 390 (A)1987–1997No measured PTO figure
Which should you choose?
Read our verdict on the Agrolux 80 and the MF 390 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | Agrolux 80 | MF 390 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 76.0 hp | 76.0 hp | — |
| Engine declared | KHD F4L 913 | Perkins A 4.248 | differs |
| Displacement declared | 4.09 L | 4.07 L | — |
| Maximum torque declared | 199 lb·ft · 270 N·m | 200 lb·ft · 271 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Mechanically operated, dry Borg & Beck single clutch, type: 330 | pedal-operated dry and air-cooled single clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.5 gpm · 36.0 L/min | 16.7 gpm · 63.3 L/min | +76% MF 390 (A) |
| Pressure declared | 2,176 psi · 150 bar | 2,466 psi · 170 bar | +13% MF 390 (A) |
| Three-point lift, at the coupling points declared | 6,799 lb · 3,084 kg | 6,746 lb · 3,060 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,195 lb · 2,810 kg | 6,601 lb · 2,994 kg | +7% MF 390 (A) |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 92.5 in · 2,350 mm | 84.1 in · 2,136 mm | +10% Agrolux 80 |
| Length declared | 151.4 in · 3,845 mm | 144.5 in · 3,670 mm | — |
| Width declared | 81.1 in · 2,060 mm | 76.4 in · 1,940 mm | +6% Agrolux 80 |
| Ground clearance declared | 17.7 in · 450 mm | 11.6 in · 295 mm | +53% Agrolux 80 |
| Fuel tank declared | 79.3 qt · 75 L | 114.1 qt · 108 L | +44% MF 390 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrolux 80 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrolux 80”
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”
Massey Ferguson MF 390 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 390”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”