Deutz-Fahr Agrolux 67 or Deutz-Fahr Agroplus 70?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agroplus 70 suits loader and hydraulic implement work better on this data: 24% (8.7 L/min / 2.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrolux 67 and Deutz-Fahr Agroplus 70, with the call on each
QuestionAgrolux 67Agroplus 70Call
Which puts more power through the PTO shaft?51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 67”51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 70”Not comparableNot comparable on power at the PTO shaft: the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrolux 67 and the Agroplus 70.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrolux 67 and the Agroplus 70.
Which pumps more oil for implements?36.0 L/min (9.5 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 67”44.7 L/min (11.8 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 70”AheadThe Deutz-Fahr Agroplus 70 has 24% more hydraulic flow (8.7 L/min / 2.3 gpm) than the Deutz-Fahr Agrolux 67 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”2,900 kg (6,393 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,220 kg (4,894 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”2,750 kg (6,063 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70”Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 70 is 24% heavier (530 kg / 1,168 lb) than the Deutz-Fahr Agrolux 67 (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 70”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?20Traktorenlexikon, “Deutz-Fahr Agrolux 67”20Traktorenlexikon, “Deutz-Fahr Agroplus 70”Sources disagreeNo call on forward gears: sources disagree on the figure for the Agroplus 70.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrolux 67 and the Agroplus 70.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 67”40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 70”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E rpmTraktorenlexikon, “Deutz-Fahr Agrolux 67”540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 70”AheadThe Deutz-Fahr Agroplus 70 offers 1000 rpm at the PTO, which the Deutz-Fahr Agrolux 67 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrolux 67”independentTraktorenlexikon, “Deutz-Fahr Agroplus 70”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agrolux 67”2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 70”; OECD test report 1686, 1997EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2006–20091997–2005Ahead (a fact, not an advantage)The Deutz-Fahr Agrolux 67 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agroplus 70 has 24% more hydraulic flow (8.7 L/min / 2.3 gpm) than the Deutz-Fahr Agrolux 67 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agroplus 70 is 24% heavier (530 kg / 1,168 lb) than the Deutz-Fahr Agrolux 67 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agroplus 70 offers 1000 rpm at the PTO, which the Deutz-Fahr Agrolux 67 does not (as stated by the sources).
  • The Deutz-Fahr Agrolux 67 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No call on forward gears: sources disagree on the figure for the Agroplus 70.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources