Deutz-Fahr Agrolux 60 or Hürlimann H-655 XA?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrolux 60 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-655 XA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Hürlimann H-655 XA suits loader and hydraulic implement work better on this data: 35% (12.1 L/min / 3.2 gpm) more hydraulic flow.
- The Hürlimann H-655 XA suits road haulage better on this data: 25% (1,000 kg / 2,205 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrolux 60 | H-655 XA | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 41.2 kW (55.3 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 41.2 kW (55.3 hp)Traktorenlexikon, “Hürlimann XA 655” | Not comparableNot comparable on power at the PTO shaft: the Agrolux 60 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-655 XA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrolux 60 and the H-655 XA. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrolux 60 and the H-655 XA. |
| Which pumps more oil for implements? | 34.7 L/min (9.2 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 46.8 L/min (12.4 gpm)Traktorenlexikon, “Hürlimann XA 655” | AheadThe Hürlimann H-655 XA has 35% more hydraulic flow (12.1 L/min / 3.2 gpm) than the Deutz-Fahr Agrolux 60 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,900 kg (6,393 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 2,900 kg (6,393 lb)Traktorenlexikon, “Hürlimann XA 655” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,220 kg (4,894 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 2,600 kg (5,732 lb)Traktorenlexikon, “Hürlimann XA 655” | Ahead (a fact, not an advantage)The Hürlimann H-655 XA is 17% heavier (380 kg / 838 lb) than the Deutz-Fahr Agrolux 60 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 5,000 kg (11,023 lb)Traktorenlexikon, “Hürlimann XA 655” | AheadThe Hürlimann H-655 XA has 25% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Deutz-Fahr Agrolux 60 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 45Traktorenlexikon, “Hürlimann XA 655” | AheadThe Hürlimann H-655 XA has 181% more forward gears (29 gears) than the Deutz-Fahr Agrolux 60 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrolux 60 and the H-655 XA. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 60” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XA 655” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrolux 60” | 540/540E/1000 rpmTraktorenlexikon, “Hürlimann XA 655” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrolux 60” | — | No figureNo call on PTO independence: not stated for the H-655 XA. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agrolux 60” | 2WD / 4WDTraktorenlexikon, “Hürlimann XA 655” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2005 | 2000–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann H-655 XA has 35% more hydraulic flow (12.1 L/min / 3.2 gpm) than the Deutz-Fahr Agrolux 60 (both pump flow, as stated by the source).
- The Hürlimann H-655 XA is 17% heavier (380 kg / 838 lb) than the Deutz-Fahr Agrolux 60 (both unladen weight, as stated by the source).
- The Hürlimann H-655 XA has 25% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Deutz-Fahr Agrolux 60 (both maximum permissible mass, as stated by the source).
- The Hürlimann H-655 XA has 181% more forward gears (29 gears) than the Deutz-Fahr Agrolux 60 (both forward gears, as stated by the source).
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrolux 60 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-655 XA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources