Deutz-Fahr Agrokid 45 A or Fendt 240 S?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrokid 45 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 240 S suits loader and hydraulic implement work better on this data: 104% (1,250 kg / 2,756 lb) more three-point lift.
  • The Fendt 240 S suits road haulage better on this data: 67% (1,600 kg / 3,527 lb) more maximum permissible mass and 48% (13.0 km/h / 8.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrokid 45 A and Fendt 240 S, with the call on each
QuestionAgrokid 45 A240 SCall
Which puts more power through the PTO shaft?30.9 kW (41.4 hp)Traktorenlexikon, “Deutz-Fahr Agrokid 45”29.3 kW (39.3 hp)Traktorenlexikon, “Fendt Farmer 240 S”Not comparableNot comparable on power at the PTO shaft: the Agrokid 45 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrokid 45 A and the 240 S.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrokid 45 A and the 240 S.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the Agrokid 45 A and the 240 S.
Which lifts more on the three-point hitch?1,200 kg (2,646 lb)Traktorenlexikon, “Deutz-Fahr Agrokid 45”2,450 kg (5,401 lb)Traktorenlexikon, “Fendt Farmer 240 S”AheadThe Fendt 240 S has 104% more lift (1,250 kg / 2,756 lb) than the Deutz-Fahr Agrokid 45 A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,010 kg (2,227 lb) to 1,150 kg (2,535 lb)Traktorenlexikon, “Deutz-Fahr Agrokid 45”2,285 kg (5,038 lb)Traktorenlexikon, “Fendt Farmer 240 S”Ahead (a fact, not an advantage)The Fendt 240 S is 99% heavier (1,135 kg / 2,502 lb) than the Deutz-Fahr Agrokid 45 A (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Fahr Agrokid 45”4,000 kg (8,818 lb)Traktorenlexikon, “Fendt Farmer 240 S”AheadThe Fendt 240 S has 67% higher maximum permissible mass (1,600 kg / 3,527 lb) than the Deutz-Fahr Agrokid 45 A (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?12Traktorenlexikon, “Deutz-Fahr Agrokid 45”21Traktorenlexikon, “Fendt Farmer 240 S”AheadThe Fendt 240 S has 75% more forward gears (9 gears) than the Deutz-Fahr Agrokid 45 A (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrokid 45 A and the 240 S.
Which is faster on the road?27 km/h (16.8 mph)Traktorenlexikon, “Deutz-Fahr Agrokid 45”40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 240 S”AheadThe Fendt 240 S has 48% more top speed (13.0 km/h / 8.1 mph) than the Deutz-Fahr Agrokid 45 A (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrokid 45”540/750 rpmTraktorenlexikon, “Fendt Farmer 240 S”DifferPTO speeds differ: the Deutz-Fahr Agrokid 45 A 540/1000 rpm and the Fendt 240 S 540/750 rpm — each offers a speed the other does not; which matters depends on the implement.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrokid 45”No figureNo call on PTO independence: not stated for the 240 S.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrokid 45”2WDTraktorenlexikon, “Fendt Farmer 240 S”AheadThe Deutz-Fahr Agrokid 45 A is available with four-wheel drive; the Fendt 240 S is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1996–20041987–1993Ahead (a fact, not an advantage)The Deutz-Fahr Agrokid 45 A is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 240 S has 104% more lift (1,250 kg / 2,756 lb) than the Deutz-Fahr Agrokid 45 A (both lift at the hitch ends, as stated by the source).
  • The Fendt 240 S is 99% heavier (1,135 kg / 2,502 lb) than the Deutz-Fahr Agrokid 45 A (both unladen weight, as stated by the source).
  • The Fendt 240 S has 67% higher maximum permissible mass (1,600 kg / 3,527 lb) than the Deutz-Fahr Agrokid 45 A (both maximum permissible mass, as stated by the source).
  • The Fendt 240 S has 75% more forward gears (9 gears) than the Deutz-Fahr Agrokid 45 A (both forward gears, as stated by the source).
  • The Fendt 240 S has 48% more top speed (13.0 km/h / 8.1 mph) than the Deutz-Fahr Agrokid 45 A (both top speed forward, as stated by the source).
  • The Deutz-Fahr Agrokid 45 A is available with four-wheel drive; the Fendt 240 S is two-wheel drive (as stated by the sources).
  • The Deutz-Fahr Agrokid 45 A is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • PTO speeds differ: the Deutz-Fahr Agrokid 45 A 540/1000 rpm and the Fendt 240 S 540/750 rpm — each offers a speed the other does not; which matters depends on the implement.
  • Not comparable on power at the PTO shaft: the Agrokid 45 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources