11 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrokid 40 (45)2005–2007No measured PTO figureTractor twoJohn Deere 5200 (A)1992–1997No measured PTO figure

Which should you choose?

Read our verdict on the Agrokid 40 (45) and the 5200 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrokid 40 (45) and John Deere 5200 (A), field by field
FieldAgrokid 40 (45)5200 (A)Gap
Engine
Engine power, claimed claimed39.4 hp39.4 hp—
Engine declaredMitsubishi S4L-T 61 ST (ab 2006: S4L-Y 1 T 62 ST)John Deere 3.029differs
Displacement declared1.50 L2.94 L+96% 5200 (A)
Maximum torque declared—115 lb·ft · 156 N·m—
Transmission
Top speed declared19.6 mph · 31.5 km/h18.6 mph · 30 km/h—
Clutch declaredMechanically operated dry SAME double clutchPedal-operated dry CARRARO single-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared—11.8 gpm · 44.7 L/min—
Pressure declared—3,408 psi · 235 bar—
Three-point lift, at the coupling points declared2,646 lb · 1,200 kg3,803 lb · 1,725 kg+44% 5200 (A)
Rear PTO speeds declared540 rpm / 1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared2,866 lb · 1,300 kg4,248 lb · 1,927 kg+48% 5200 (A)
Maximum permissible mass declared5,291 lb · 2,400 kg——
Wheelbase declared68.7 in · 1,746 mm80.7 in · 2,050 mm+17% 5200 (A)
Length declared117.3 in · 2,980 mm139.4 in · 3,541 mm+19% 5200 (A)
Width declared48.0–53.5 in · 1,220–1,360 mm72.7–88.5 in · 1,846–2,249 mmdiffers
Ground clearance declared15.4 in · 392 mm19.3 in · 490 mm+25% 5200 (A)
Turning radius, braked declared—9.8 ft · 3.00 m—
Fuel tank declared40.2 qt · 38 L72.0 qt · 68.1 L+79% 5200 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrokid 40 (45) sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrokid 40”

John Deere 5200 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 5200 (USA)”