10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrofarm 430from 2008No measured PTO figureTractor twoFendt 209 Sfrom 2003No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); they were not built in overlapping years (2008–2008; 2003–2003). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrofarm 430 | 209 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 107 hp | 88.4 hp | +21% Agrofarm 430 |
| Engine declared | Deutz-AG TCD 2012 L04 | Deutz BF 4 L 914 | differs |
| Displacement declared | 4.04 L | 4.31 L | +7% 209 S |
| Maximum torque declared | 295 lb·ft · 400 N·m | 241 lb·ft · 327 N·m | +22% Agrofarm 430 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Mechanical single-disc dry clutch | Dry multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 14.3 gpm · 54.0 L/min | — | — |
| Pressure declared | — | 2,524 psi · 174 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 750 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,039 lb · 4,100 kg | 7,099 lb · 3,220 kg | +27% Agrofarm 430 |
| Wheelbase declared | 92.1 in · 2,340 mm | 87.9 in · 2,232 mm | — |
| Length declared | 157.1 in · 3,990 mm | 145.5 in · 3,695 mm | +8% Agrofarm 430 |
| Width declared | 85.0 in · 2,160 mm | 77.3 in · 1,963 mm | +10% Agrofarm 430 |
| Ground clearance declared | 19.3 in · 490 mm | 15.6 in · 395 mm | +24% Agrofarm 430 |
| Turning radius, braked declared | 12.1 ft · 3.70 m | 12.6 ft · 3.84 m | — |
| Fuel tank declared | 169.1 qt · 160 L | 59.2 qt · 56 L | +186% Agrofarm 430 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrofarm 430 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrofarm 430”
Fendt 209 S sources
- Source: Traktorenlexikon, “Fendt Farmer 209 S”
- Source: Traktorenlexikon, “Fendt Farmer 208 S”