Deutz-Fahr Agrofarm 100 vs VALMET 6350 HiTech

10 material differences · fewer than 12

Tractor one

2007–2008

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the Agrofarm 100 and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrofarm 100 and VALMET 6350 HiTech, field by field
Field	Agrofarm 100	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	—	VALMET 420 DSRE or 44.311 DT	—
Displacement declared	—	4.40 L	—
Maximum torque declared	260 lb·ft · 353 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry single clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	14.7 gpm · 55.5 L/min	18.5 gpm · 70.0 L/min	+26% 6350 HiTech
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	10,582 lb · 4,800 kg	12,346 lb · 5,600 kg	+17% 6350 HiTech
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,480 lb · 4,300 kg	10,516 lb · 4,770 kg	+11% 6350 HiTech
Maximum permissible mass declared	15,873 lb · 7,200 kg	19,842 lb · 9,000 kg	+25% 6350 HiTech
Wheelbase declared	92.1 in · 2,340 mm	91.6 in · 2,326 mm	—
Length declared	155.5 in · 3,950 mm	180.5 in · 4,585 mm	+16% 6350 HiTech
Width declared	86.8 in · 2,204 mm	92.3 in · 2,345 mm	+6% 6350 HiTech
Height declared	103.9 in · 2,638 mm	110.2 in · 2,800 mm	+6% 6350 HiTech
Ground clearance declared	19.7 in · 500 mm	17.1 in · 434 mm	+15% Agrofarm 100
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	169.1 qt · 160 L	174.4 qt · 165.0 L	—

Source

Source