Deutz-Fahr Agrocompact 80 V/F vs Massey Ferguson MF 397 A

11 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1987–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Agrocompact 80 V/F and the MF 397 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrocompact 80 V/F and Massey Ferguson MF 397 A, field by field
Field	Agrocompact 80 V/F	MF 397 A	Gap
Engine
Engine power, claimed claimed	79.0 hp	79.0 hp	—
Engine declared	SLH 1.000.4 W	Perkins A 4.248	differs
Displacement declared	4.00 L	4.07 L	—
Maximum torque declared	207 lb·ft · 281 N·m	199 lb·ft · 270 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pressure declared	—	2,756 psi · 190 bar	—
Three-point lift at ends declared	5,732 lb · 2,600 kg	6,614 lb · 3,000 kg	+15% MF 397 A
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,952–6,063 lb · 2,700–2,750 kg	8,576 lb · 3,890 kg	differs
Maximum permissible mass declared	9,480 lb · 4,300 kg	—	—
Wheelbase declared	80.9 in · 2,056 mm	95.1 in · 2,415 mm	+17% MF 397 A
Length declared	145.9 in · 3,706 mm	157.5 in · 4,000 mm	+8% MF 397 A
Width declared	47.2–56.1 in · 1,199–1,425 mm	82.7 in · 2,100 mm	differs
Height declared	84.7–85.5 in · 2,151–2,171 mm	105.5 in · 2,680 mm	differs
Ground clearance declared	8.3–9.1 in · 210–230 mm	16.7 in · 425 mm	differs
Fuel tank declared	39.1 qt · 37 L	107.8 qt · 102.0 L	+176% MF 397 A

Source

Source