Deutz-Fahr Agrocompact 70 V/F 3 or Fiat 70-86 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrocompact 70 V/F 3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 70-86 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrocompact 70 V/F 3 suits loader and hydraulic implement work better on this data: 26% (625 kg / 1,378 lb) more three-point lift.
- The Deutz-Fahr Agrocompact 70 V/F 3 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrocompact 70 V/F 3 | 70-86 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 51.5 kW (69.1 hp)Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | Not comparableNot comparable on power at the PTO shaft: the Agrocompact 70 V/F 3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 70-86 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrocompact 70 V/F 3 and the 70-86 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrocompact 70 V/F 3 and the 70-86 (DT). |
| Which pumps more oil for implements? | — | 40.0 L/min (10.6 gpm)Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | No figureNo call on hydraulic flow: no figure on record for the Agrocompact 70 V/F 3. |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 2,375 kg (5,236 lb)Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | AheadThe Deutz-Fahr Agrocompact 70 V/F 3 has 26% more lift (625 kg / 1,378 lb) than the Fiat 70-86 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,475 kg (5,456 lb) to 2,525 kg (5,567 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 1,947 kg (4,292 lb)Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrocompact 70 V/F 3 is 27% heavier (528 kg / 1,164 lb) than the Fiat 70-86 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agrocompact 70 V/F 3 and the 70-86 (DT). |
| Which has the wider choice of gears? | 20Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 12 to 20Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrocompact 70 V/F 3 and the 70-86 (DT). |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 30 km/h (18.6 mph)Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | AheadThe Deutz-Fahr Agrocompact 70 V/F 3 has 33% more top speed (10.0 km/h / 6.2 mph) than the Fiat 70-86 (DT) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | 540 rpmTraktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | AheadThe Deutz-Fahr Agrocompact 70 V/F 3 offers 1000 rpm at the PTO, which the Fiat 70-86 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | No figureNo call on PTO independence: not stated for the Agrocompact 70 V/F 3. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrocompact 70 F” | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2006 | 1992–2000 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrocompact 70 V/F 3 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrocompact 70 V/F 3 has 26% more lift (625 kg / 1,378 lb) than the Fiat 70-86 (DT) (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr Agrocompact 70 V/F 3 is 27% heavier (528 kg / 1,164 lb) than the Fiat 70-86 (DT) (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrocompact 70 V/F 3 has 33% more top speed (10.0 km/h / 6.2 mph) than the Fiat 70-86 (DT) (both top speed forward, as stated by the source).
- The Deutz-Fahr Agrocompact 70 V/F 3 offers 1000 rpm at the PTO, which the Fiat 70-86 (DT) does not (as stated by the sources).
- The Deutz-Fahr Agrocompact 70 V/F 3 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrocompact 70 V/F 3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 70-86 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources