Deutz-Fahr Agrocompact 60 V/F or Fiat L 60 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrocompact 60 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the L 60 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat L 60 (DT) suits loader and hydraulic implement work better on this data: 12% (300 kg / 661 lb) more three-point lift.
  • The Fiat L 60 (DT) suits road haulage better on this data: 21% (900 kg / 1,984 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrocompact 60 V/F and Fiat L 60 (DT), with the call on each
QuestionAgrocompact 60 V/FL 60 (DT)Call
Which puts more power through the PTO shaft?44.2 kW (59.3 hp)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”44.2 kW (59.3 hp)Traktorenlexikon, “Fiatagri L60”Not comparableNot comparable on power at the PTO shaft: the Agrocompact 60 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the L 60 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrocompact 60 V/F and the L 60 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrocompact 60 V/F and the L 60 (DT).
Which pumps more oil for implements?47 L/min (12.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”44.5 L/min (11.8 gpm)Traktorenlexikon, “Fiatagri L60”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”2,900 kg (6,393 lb)Traktorenlexikon, “Fiatagri L60”AheadThe Fiat L 60 (DT) has 12% more lift (300 kg / 661 lb) than the Deutz-Fahr Agrocompact 60 V/F (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,475 kg (5,456 lb) to 2,525 kg (5,567 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”3,940 kg (8,686 lb)Traktorenlexikon, “Fiatagri L60”Ahead (a fact, not an advantage)The Fiat L 60 (DT) is 56% heavier (1,415 kg / 3,120 lb) than the Deutz-Fahr Agrocompact 60 V/F (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”5,200 kg (11,464 lb)Traktorenlexikon, “Fiatagri L60”AheadThe Fiat L 60 (DT) has 21% higher maximum permissible mass (900 kg / 1,984 lb) than the Deutz-Fahr Agrocompact 60 V/F (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20Traktorenlexikon, “Deutz-Fahr Agrocompact 60”12 to 24Traktorenlexikon, “Fiatagri L60”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Fiatagri L60”No figureNo call on a creeper range: not stated for the Agrocompact 60 V/F.
Which is faster on the road?38 km/h (23.6 mph)Traktorenlexikon, “Deutz-Fahr Agrocompact 60”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri L60”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrocompact 60”540/540E/1000 rpmTraktorenlexikon, “Fiatagri L60”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri L60”No figureNo call on PTO independence: not stated for the Agrocompact 60 V/F.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrocompact 60”Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri L60”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20041996–1998EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat L 60 (DT) has 12% more lift (300 kg / 661 lb) than the Deutz-Fahr Agrocompact 60 V/F (both lift at the hitch ends, as stated by the source).
  • The Fiat L 60 (DT) is 56% heavier (1,415 kg / 3,120 lb) than the Deutz-Fahr Agrocompact 60 V/F (both unladen weight, as stated by the source).
  • The Fiat L 60 (DT) has 21% higher maximum permissible mass (900 kg / 1,984 lb) than the Deutz-Fahr Agrocompact 60 V/F (both maximum permissible mass, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrocompact 60 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the L 60 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources