Deutz-Fahr Agrocompact 3.30 V/F or Renault 58-34 MX?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrocompact 3.30 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 58-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Renault 58-34 MX suits loader and hydraulic implement work better on this data: 30% (670 kg / 1,477 lb) more three-point lift.
- The Renault 58-34 MX suits road haulage better on this data: 28% (1,100 kg / 2,425 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrocompact 3.30 V/F | 58-34 MX | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 39.7 kW (53.2 hp)Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 39.7 kW (53.2 hp)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | Not comparableNot comparable on power at the PTO shaft: the Agrocompact 3.30 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 58-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrocompact 3.30 V/F and the 58-34 MX. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrocompact 3.30 V/F and the 58-34 MX. |
| Which pumps more oil for implements? | — | 32.3 L/min (8.5 gpm)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | No figureNo call on hydraulic flow: no figure on record for the Agrocompact 3.30 V/F. |
| Which lifts more on the three-point hitch? | 2,200.000 kg (4,850 lb)Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 2,870 kg (6,327 lb)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | AheadThe Renault 58-34 MX has 30% more lift (670 kg / 1,477 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,150 kg (4,740 lb) to 2,350 kg (5,181 lb)Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 3,070 kg (6,768 lb)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | Ahead (a fact, not an advantage)The Renault 58-34 MX is 31% heavier (720 kg / 1,587 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 5,100 kg (11,244 lb)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | AheadThe Renault 58-34 MX has 28% higher maximum permissible mass (1,100 kg / 2,425 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 12 to 24Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrocompact 3.30 V/F and the 58-34 MX. |
| Which is faster on the road? | 35 km/h (21.7 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 540/1000 rpmTraktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | — | No figureNo call on PTO independence: not stated for the 58-34 MX. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr AgroCompact 3.30” | 4WDTraktorenlexikon, “Renault 58-34 ME/MA/MS/MX R3112” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1992–1996 | 1989–1993 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 58-34 MX has 30% more lift (670 kg / 1,477 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both lift at the hitch ends, as stated by the source).
- The Renault 58-34 MX is 31% heavier (720 kg / 1,587 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both unladen weight, as stated by the source).
- The Renault 58-34 MX has 28% higher maximum permissible mass (1,100 kg / 2,425 lb) than the Deutz-Fahr Agrocompact 3.30 V/F (both maximum permissible mass, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrocompact 3.30 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 58-34 MX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources