Deutz-Fahr Agrocompact 100 V/F or Hürlimann H-488 T "Prestige"?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrocompact 100 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-488 T "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrocompact 100 V/F suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrocompact 100 V/F | H-488 T "Prestige" | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 66.2 kW (88.8 hp)Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 66.2 kW (88.8 hp)Traktorenlexikon, “Hürlimann H 488 T Prestige” | Not comparableNot comparable on power at the PTO shaft: the Agrocompact 100 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-488 T "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrocompact 100 V/F and the H-488 T "Prestige". |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrocompact 100 V/F and the H-488 T "Prestige". |
| Which pumps more oil for implements? | — | — | No figureNo call on hydraulic flow: no figure on record for the Agrocompact 100 V/F and the H-488 T "Prestige". |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 2,880 kg (6,349 lb)Traktorenlexikon, “Hürlimann H 488 T Prestige” | Not comparableNot comparable on three-point lift: the Agrocompact 100 V/F: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F”); the H-488 T "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 488 T Prestige”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,700 kg (5,952 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 3,395 kg (7,485 lb)Traktorenlexikon, “Hürlimann H 488 T Prestige” | Ahead (a fact, not an advantage)The Hürlimann H-488 T "Prestige" is 26% heavier (695 kg / 1,532 lb) than the Deutz-Fahr Agrocompact 100 V/F (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agrocompact 100 V/F and the H-488 T "Prestige". |
| Which has the wider choice of gears? | 20Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 24Traktorenlexikon, “Hürlimann H 488 T Prestige” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrocompact 100 V/F and the H-488 T "Prestige". |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 488 T Prestige” | AheadThe Deutz-Fahr Agrocompact 100 V/F has 33% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann H-488 T "Prestige" (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 540/1000 rpmTraktorenlexikon, “Hürlimann H 488 T Prestige” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Hürlimann H 488 T Prestige” | No figureNo call on PTO independence: not stated for the Agrocompact 100 V/F. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrocompact 100 F” | 4WDTraktorenlexikon, “Hürlimann H 488 T Prestige” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2004–2006 | 1989–1998 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrocompact 100 V/F is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann H-488 T "Prestige" is 26% heavier (695 kg / 1,532 lb) than the Deutz-Fahr Agrocompact 100 V/F (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrocompact 100 V/F has 33% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann H-488 T "Prestige" (both top speed forward, as stated by the source).
- The Deutz-Fahr Agrocompact 100 V/F is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrocompact 100 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the H-488 T "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agrocompact 100 V/F: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrocompact 100 F”); the H-488 T "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 488 T Prestige”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources