9 material differences · fewer than 12
Tractor oneDeutz-Fahr 70 (F)2001–2005No measured PTO figureTractor twoFendt 207 Sfrom 2003No measured PTO figure
Which should you choose?
Read our verdict on the 70 (F) and the 207 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 70 (F) | 207 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 68 hp | — |
| Engine declared | KHD F3L 913 | Deutz BF 3 L 914 | differs |
| Displacement declared | 3.06 L | 3.24 L | +6% 207 S |
| Maximum torque declared | 185 lb·ft · 251 N·m | 195 lb·ft · 264 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Mechanically operated dry Borg & Beck single clutch, type: 305 | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.8 gpm · 33.5 L/min | — | — |
| Pressure declared | 2,176 psi · 150 bar | 2,901 psi · 200 bar | +33% 207 S |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,115 lb · 2,320 kg | 6,900 lb · 3,130 kg | +35% 207 S |
| Maximum permissible mass declared | — | 11,684 lb · 5,300 kg | — |
| Wheelbase declared | 82.8 in · 2,104 mm | 82.8 in · 2,102 mm | — |
| Length declared | 150.1 in · 3,812 mm | 140.4 in · 3,565 mm | +7% 70 (F) |
| Width declared | 82.7 in · 2,100 mm | 75.8 in · 1,925 mm | +9% 70 (F) |
| Ground clearance declared | 14.4 in · 365 mm | 15.6 in · 395 mm | +8% 207 S |
| Fuel tank declared | 59.2 qt · 56 L | 75.0 qt · 71 L | +27% 207 S |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr 70 (F) sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrolux 70”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
Fendt 207 S sources
- Source: Traktorenlexikon, “Fendt Farmer 207 S”
- Source: Traktorenlexikon, “Fendt Farmer 206 S”