Deutz-Fahr 70 (F) or Fendt 207/F/FA?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 207/F/FA suits loader and hydraulic implement work better on this data: 121% (40.5 L/min / 10.7 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 70 (F) | 207/F/FA | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 51 kW (68 hp)Traktorenlexikon, “Fendt Farmer 207 F/FA” | Not comparableNot comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 70 (F) and the 207/F/FA. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 70 (F) and the 207/F/FA. |
| Which pumps more oil for implements? | 33.5 L/min (8.8 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 74 L/min (19.5 gpm)Traktorenlexikon, “Fendt Farmer 207 F/FA” | AheadThe Fendt 207/F/FA has 121% more hydraulic flow (40.5 L/min / 10.7 gpm) than the Deutz-Fahr 70 (F) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 2,714 kg (5,983 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | No figureNo call on three-point lift: no figure on record for the 70 (F). |
| Which is heavier, for traction? | 2,320 kg (5,115 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 2,475 kg (5,456 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 4,000 kg (8,818 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | No figureNo call on maximum permissible mass: no figure on record for the 70 (F). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 21Traktorenlexikon, “Fendt Farmer 207 F/FA” | AheadThe Fendt 207/F/FA has 31% more forward gears (5 gears) than the Deutz-Fahr 70 (F) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 70 (F) and the 207/F/FA. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 207 F/FA” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrolux 70” | 540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 207 F/FA” | AheadThe Fendt 207/F/FA offers 750 rpm at the PTO, which the Deutz-Fahr 70 (F) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrolux 70” | — | No figureNo call on PTO independence: not stated for the 207/F/FA. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr Agrolux 70” | Two-wheel or four-wheel driveTraktorenlexikon, “Fendt Farmer 207 F/FA” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2005 | 2002–2009 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 207/F/FA has 121% more hydraulic flow (40.5 L/min / 10.7 gpm) than the Deutz-Fahr 70 (F) (both pump flow, as stated by the source).
- The Fendt 207/F/FA has 31% more forward gears (5 gears) than the Deutz-Fahr 70 (F) (both forward gears, as stated by the source).
- The Fendt 207/F/FA offers 750 rpm at the PTO, which the Deutz-Fahr 70 (F) does not (as stated by the sources).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources