Deutz-Fahr 70 (F) or Deutz-Fahr Agroplus 77?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 77 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agroplus 77 suits loader and hydraulic implement work better on this data: 61% (20.5 L/min / 5.4 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 70 (F) | Agroplus 77 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | Not comparableNot comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 77 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 70 (F) and the Agroplus 77. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 70 (F) and the Agroplus 77. |
| Which pumps more oil for implements? | 33.5 L/min (8.8 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 54.0 L/min (14.3 gpm)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | AheadThe Deutz-Fahr Agroplus 77 has 61% more hydraulic flow (20.5 L/min / 5.4 gpm) than the Deutz-Fahr 70 (F) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | No figureNo call on three-point lift: no figure on record for the 70 (F). |
| Which is heavier, for traction? | 2,320 kg (5,115 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 2,700 kg (5,952 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 77 is 16% heavier (380 kg / 838 lb) than the Deutz-Fahr 70 (F) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | No figureNo call on maximum permissible mass: no figure on record for the 70 (F). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 20Traktorenlexikon, “Deutz-Fahr Agroplus 77” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 70 (F) and the Agroplus 77. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 70” | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 77” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrolux 70” | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 77” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrolux 70” | independentTraktorenlexikon, “Deutz-Fahr Agroplus 77” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agrolux 70” | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 77” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2005 | 2006–2009 | Ahead (a fact, not an advantage)The Deutz-Fahr Agroplus 77 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agroplus 77 has 61% more hydraulic flow (20.5 L/min / 5.4 gpm) than the Deutz-Fahr 70 (F) (both pump flow, as stated by the source).
- The Deutz-Fahr Agroplus 77 is 16% heavier (380 kg / 838 lb) than the Deutz-Fahr 70 (F) (both unladen weight, as stated by the source).
- The Deutz-Fahr Agroplus 77 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agroplus 77 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources