Deutz-Fahr 70 (F) or Deutz-Fahr Agrolux 67?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr 70 (F) and Deutz-Fahr Agrolux 67, with the call on each
Question70 (F)Agrolux 67Call
Which puts more power through the PTO shaft?51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 70”51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrolux 67”Not comparableNot comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 70 (F) and the Agrolux 67.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 70 (F) and the Agrolux 67.
Which pumps more oil for implements?33.5 L/min (8.8 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 70”36.0 L/min (9.5 gpm)Traktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?—3,000 kg (6,614 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”No figureNo call on three-point lift: no figure on record for the 70 (F).
Which is heavier, for traction?2,320 kg (5,115 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 70”2,220 kg (4,894 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrolux 67”No figureNo call on maximum permissible mass: no figure on record for the 70 (F).
Which has the wider choice of gears?16Traktorenlexikon, “Deutz-Fahr Agrolux 70”20Traktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 70 (F) and the Agrolux 67.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 70”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrolux 70”540/540E rpmTraktorenlexikon, “Deutz-Fahr Agrolux 67”AheadThe Deutz-Fahr 70 (F) offers 1000 rpm at the PTO, which the Deutz-Fahr Agrolux 67 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrolux 70”independentTraktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr Agrolux 70”Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr Agrolux 67”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2001–20052006–2009Ahead (a fact, not an advantage)The Deutz-Fahr Agrolux 67 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr 70 (F) offers 1000 rpm at the PTO, which the Deutz-Fahr Agrolux 67 does not (as stated by the sources).
  • The Deutz-Fahr Agrolux 67 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 70 (F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrolux 67 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources