9 material differences · fewer than 12
Tractor oneDeutz (KHD) F3L 514/541954–1956No measured PTO figureTractor twoSAME Minitauro 501967–1972No measured PTO figure
Which should you choose?
Read our verdict on the F3L 514/54 and the Minitauro 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | F3L 514/54 | Minitauro 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.1 hp | 47.3 hp | +7% Minitauro 50 |
| Engine declared | KHD F3L 514 | SAME DA 029-953 L | differs |
| Displacement declared | 3.99 L | 2.55 L | +56% F3L 514/54 |
| Maximum torque declared | 159 lb·ft · 216 N·m | 116 lb·ft · 157 N·m | +38% F3L 514/54 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20.0 km/h | 15.5 mph · 25 km/h | +25% Minitauro 50 |
| Clutch declared | — | Pedal operated dry two-stage double clutch with coil springs | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.3 gpm · 16.1 L/min | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 577 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,512 lb · 2,500 kg | 3,858 lb · 1,750 kg | +43% F3L 514/54 |
| Maximum permissible mass declared | 8,598 lb · 3,900 kg | — | — |
| Wheelbase declared | 81.6 in · 2,073 mm | 77.6 in · 1,970 mm | — |
| Length declared | 134.6 in · 3,420 mm | 128.7 in · 3,270 mm | — |
| Width declared | 69.5 in · 1,765 mm | 60.2–87.8 in · 1,530–2,230 mm | differs |
| Ground clearance declared | 17.1 in · 435 mm | 13.4 in · 340 mm | +28% F3L 514/54 |
| Turning radius, braked declared | 9.8 ft · 3.00 m | 9.6 ft · 2.94 m | — |
| Fuel tank declared | 71.9 qt · 68 L | 52.8 qt · 50.0 L | +36% F3L 514/54 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F3L 514/54 sources
- Source: Traktorenlexikon, “Deutz F3L 514/54”
- Source: Traktorenlexikon, “Fahr D 45 L”
SAME Minitauro 50 sources
- Source: Traktorenlexikon, “SAME Minitauro 50”