8 material differences · fewer than 12
Tractor oneDeutz (KHD) F3L 514/541954–1956No measured PTO figureTractor twoFahr D 400 A1955–1960No measured PTO figure
Which should you choose?
Read our verdict on the F3L 514/54 and the D 400 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | F3L 514/54 | D 400 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.1 hp | 44.4 hp | — |
| Engine declared | KHD F3L 514 | KHD F3L 514 | — |
| Displacement declared | 3.99 L | 3.99 L | — |
| Maximum torque declared | 159 lb·ft · 216 N·m | 164 lb·ft · 223 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20.0 km/h | 12.4–16.8 mph · 20–27 km/h | differs |
| Clutch declared | — | pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.9 gpm · 18.5 L/min | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 577 rpm | 588 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,512 lb · 2,500 kg | 6,217 lb · 2,820 kg | +13% D 400 A |
| Maximum permissible mass declared | 8,598 lb · 3,900 kg | 8,818 lb · 4,000 kg | — |
| Wheelbase declared | 81.6 in · 2,073 mm | 91.3 in · 2,320 mm | +12% D 400 A |
| Length declared | 134.6 in · 3,420 mm | 143.7 in · 3,650 mm | +7% D 400 A |
| Width declared | 69.5 in · 1,765 mm | 73.4 in · 1,865 mm | +6% D 400 A |
| Ground clearance declared | 17.1 in · 435 mm | 19.7 in · 500 mm | +15% D 400 A |
| Turning radius, braked declared | 9.8 ft · 3.00 m | 12.6 ft · 3.85 m | +28% D 400 A |
| Fuel tank declared | 71.9 qt · 68 L | 68.7 qt · 65 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F3L 514/54 sources
- Source: Traktorenlexikon, “Deutz F3L 514/54”
- Source: Traktorenlexikon, “Fahr D 45 L”
Fahr D 400 A sources
- Source: Traktorenlexikon, “Fahr D 400 A”
- Source: Traktorenlexikon, “Fahr D 45 L”