10 material differences · fewer than 12
Tractor oneDeutz (KHD) F2L 612/51956–1959No measured PTO figureTractor twoInternational Harvester Super FC-D1953–1957No measured PTO figure
Which should you choose?
Read our verdict on the F2L 612/5 and the Super FC-D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | F2L 612/5 | Super FC-D | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24 hp | 24 hp | — |
| Engine declared | KHD F2L 612 | INTERNATIONAL HARVESTER FD-123 | differs |
| Displacement declared | 1.53 L | 2.01 L | +32% Super FC-D |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 10.6 mph · 17 km/h | +18% F2L 612/5 |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.6 gpm · 17.3 L/min | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 539 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,020 lb · 1,370 kg | 3,594 lb · 1,630 kg | +19% Super FC-D |
| Wheelbase declared | 70.1 in · 1,780 mm | 91.5 in · 2,324 mm | +31% Super FC-D |
| Length declared | 107.1 in · 2,720 mm | 129.5 in · 3,290 mm | +21% Super FC-D |
| Width declared | 63.0 in · 1,600 mm | 78.0–87.8 in · 1,980–2,230 mm | differs |
| Ground clearance declared | — | 22.4 in · 570 mm | — |
| Turning radius, braked declared | 8.7 ft · 2.65 m | 12.0 ft · 3.65 m | +38% Super FC-D |
| Fuel tank declared | 31.7 qt · 30 L | 44.1 qt · 41.75 L | +39% Super FC-D |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F2L 612/5 sources
- Source: Traktorenlexikon, “Deutz F2L 612/5”
International Harvester Super FC-D sources
- Source: Traktorenlexikon, “McCormick Super-FC-D”