10 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L 712/11958–1959No measured PTO figureTractor twoInternational Harvester DLD 2 (McCormick)1953–1956No measured PTO figure
Which should you choose?
Read our verdict on the F1L 712/1 and the DLD 2 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | F1L 712/1 | DLD 2 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 12.7 hp | 13.8 hp | +8% DLD 2 |
| Engine declared | KHD F1L 712 | INTERNATIONAL-HARVESTER DD-66 | differs |
| Displacement declared | 0.85 L | 1.09 L | +28% DLD 2 |
| Maximum torque declared | 32 lb·ft · 43 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 11.8 mph · 19 km/h | — |
| Clutch declared | pedal operated dry single plate clutch in flywheel | Pedal operated dry Fichtel & Sachs single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | — | — |
| Pressure declared | 1,422 psi · 98 bar | — | — |
| Rear PTO speeds declared | 1350 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 1,830 lb · 830 kg | 1,808 lb · 820 kg | — |
| Maximum permissible mass declared | 3,307 lb · 1,500 kg | — | — |
| Wheelbase declared | 65.0–70.9 in · 1,650–1,800 mm | 62.0 in · 1,575 mm | differs |
| Length declared | 109.4 in · 2,780 mm | 96.9 in · 2,461 mm | +13% F1L 712/1 |
| Width declared | 55.5 in · 1,410 mm | 60.6 in · 1,540 mm | +9% DLD 2 |
| Ground clearance declared | 17.3–19.7 in · 440–500 mm | 14.2 in · 360 mm | differs |
| Turning radius, braked declared | 8.5 ft · 2.60 m | 8.0 ft · 2.45 m | +6% F1L 712/1 |
| Fuel tank declared | 21.7 qt · 20.5 L | 19.0 qt · 18.0 L | +14% F1L 712/1 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L 712/1 sources
- Source: Traktorenlexikon, “Deutz F1L 712”
International Harvester DLD 2 (McCormick) sources
- Source: Traktorenlexikon, “McCormick DLD 2”