Deutz (KHD) F1L 712/1 or Fahr D 90?

Which should you choose?

On performance, every comparable figure that differs favours the Fahr D 90: maximum permissible mass.

  • The Fahr D 90 suits road haulage better on this data: 12% (180 kg / 397 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) F1L 712/1 and Fahr D 90, with the call on each
QuestionF1L 712/1D 90Call
Which puts more power through the PTO shaft?9.1 kW (12.18 hp)Traktorenlexikon, “Deutz F1L 712”8.8 kW (12 hp)Traktorenlexikon, “Fahr D 90”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the F1L 712/1 and the D 90.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the F1L 712/1 and the D 90.
Which pumps more oil for implements?16.0 L/min (4.2 gpm)Traktorenlexikon, “Deutz F1L 712”—No figureNo call on hydraulic flow: no figure on record for the D 90.
Which lifts more on the three-point hitch?—690 kg (1,521 lb)Traktorenlexikon, “Fahr D 90”No figureNo call on three-point lift: no figure on record for the F1L 712/1.
Which is heavier, for traction?830 kg (1,830 lb)Traktorenlexikon, “Deutz F1L 712”1,050 kg (2,315 lb)Traktorenlexikon, “Fahr D 90”Ahead (a fact, not an advantage)The Fahr D 90 is 27% heavier (220 kg / 485 lb) than the Deutz F1L 712/1 (both unladen weight, as stated by the source).
Which may carry more ballast and load?1,500 kg (3,307 lb)Traktorenlexikon, “Deutz F1L 712”1,680 kg (3,704 lb)Traktorenlexikon, “Fahr D 90”AheadThe Fahr D 90 has 12% higher maximum permissible mass (180 kg / 397 lb) than the Deutz F1L 712/1 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?6Traktorenlexikon, “Deutz F1L 712”5 to 10Traktorenlexikon, “Fahr D 90”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the F1L 712/1 and the D 90.
Which is faster on the road?19 km/h (11.8 mph)Traktorenlexikon, “Deutz F1L 712”17.8 km/h (11.1 mph)Traktorenlexikon, “Fahr D 90”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?1350Traktorenlexikon, “Deutz F1L 712”588 rpmTraktorenlexikon, “Fahr D 90”No figureNo call on PTO speeds: no standard PTO speed stated for the F1L 712/1 and the D 90.
Which PTO runs independently of the ground drive?dependent (stops with the clutch)Traktorenlexikon, “Deutz F1L 712”—No figureNo call on PTO independence: not stated for the D 90.
Which drives on both axles?2WDTraktorenlexikon, “Deutz F1L 712”2WDTraktorenlexikon, “Fahr D 90”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1958–19591953–1956Ahead (a fact, not an advantage)The Deutz F1L 712/1 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fahr D 90 is 27% heavier (220 kg / 485 lb) than the Deutz F1L 712/1 (both unladen weight, as stated by the source).
  • The Fahr D 90 has 12% higher maximum permissible mass (180 kg / 397 lb) than the Deutz F1L 712/1 (both maximum permissible mass, as stated by the source).
  • The Deutz F1L 712/1 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: all two-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources