11 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L 712/11958–1959No measured PTO figureTractor twoFahr D 12 N1953–1954No measured PTO figure
Which should you choose?
Read our verdict on the F1L 712/1 and the D 12 N → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | F1L 712/1 | D 12 N | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 12.7 hp | 11.8 hp | +8% F1L 712/1 |
| Engine declared | KHD F1L 712 | Güldner 1 DA | differs |
| Displacement declared | 0.85 L | 0.82 L | — |
| Maximum torque declared | 32 lb·ft · 43 N·m | 33 lb·ft · 45 N·m | — |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 12.3 mph · 19.8 km/h | — |
| Clutch declared | pedal operated dry single plate clutch in flywheel | Pedal operated dry Fichtel & Sachs single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | — | — |
| Pressure declared | 1,422 psi · 98 bar | 3,129 psi · 216 bar | +120% D 12 N |
| Rear PTO speeds declared | 1350 | 588 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 1,830 lb · 830 kg | 2,425 lb · 1,100 kg | +33% D 12 N |
| Maximum permissible mass declared | 3,307 lb · 1,500 kg | 3,638 lb · 1,650 kg | +10% D 12 N |
| Wheelbase declared | 65.0–70.9 in · 1,650–1,800 mm | 60.6 in · 1,540 mm | differs |
| Length declared | 109.4 in · 2,780 mm | 97.2 in · 2,470 mm | +13% F1L 712/1 |
| Width declared | 55.5 in · 1,410 mm | 57.9 in · 1,470 mm | — |
| Ground clearance declared | 17.3–19.7 in · 440–500 mm | 15.4 in · 390 mm | differs |
| Turning radius, braked declared | 8.5 ft · 2.60 m | 6.7 ft · 2.05 m | +27% F1L 712/1 |
| Fuel tank declared | 21.7 qt · 20.5 L | 26.4 qt · 25 L | +22% D 12 N |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L 712/1 sources
- Source: Traktorenlexikon, “Deutz F1L 712”
Fahr D 12 N sources
- Source: Traktorenlexikon, “Fahr D 12 N”
- Source: Traktorenlexikon, “Fahr D 12”