7 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L 514/511949–1956No measured PTO figureTractor twoJohn Deere Model H1939–1947No measured PTO figure
Which should you choose?
Read our verdict on the F1L 514/51 and the Model H → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | F1L 514/51 | Model H | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15 hp | 15 hp | — |
| Engine declared | KHD F1L 514 | JOHN DEERE H-1000 | differs |
| Displacement declared | 1.33 L | 1.63 L | +23% Model H |
| Maximum torque declared | 51 lb·ft · 69 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 6.2 mph · 10 km/h | +100% F1L 514/51 |
| Clutch declared | Pedal operated dry single-plate clutch from Fichtel & Sachs | Hand-operated dry John Deere double-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | — | — |
| Pressure declared | 1,991 psi · 137 bar | — | — |
| Rear PTO speeds declared | 594 rpm | 546 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,888 lb · 1,310 kg | 3,036 lb · 1,377 kg | — |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | — | — |
| Wheelbase declared | 62.4–65.7 in · 1,585–1,670 mm | — | — |
| Length declared | 98.8 in · 2,510 mm | 112.5 in · 2,858 mm | +14% Model H |
| Width declared | 63.0 in · 1,600 mm | 79.3 in · 2,013 mm | +26% Model H |
| Ground clearance declared | 15.7 in · 400 mm | — | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | — | — |
| Fuel tank declared | — | 30.0 qt · 28.4 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L 514/51 sources
- Source: Traktorenlexikon, “Deutz F1L 514/51”
John Deere Model H sources
- Source: Traktorenlexikon, “John Deere Modell H”